Intermixing in dissimilar friction stir spot welds

被引：119
|
作者：
Su, P. [1 ]
Gerlich, A. [1 ]
North, T. H. [1 ]
Bendzsak, G. J. [1 ]
机构：
[1] Univ Toronto, Toronto, ON M5S 3E4, Canada
来源：
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 2007年 / 38A卷 / 03期
基金：
加拿大自然科学与工程研究理事会;
关键词：
D O I：
10.1007/s11661-006-9067-4
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Dissimilar intermixing during friction stir spot welding of Al 5754 and Al 6111 sheets is investigated using a combination of experimentation and numerical modeling. Dissimilar intermixing is not observed in (a) spot welds made using a tool having a smooth pin with or without a dwell period and (b) spot welds made using a threaded tool without the application of a dwell period. It is proposed that dissimilar intermixing during the dwell period in spot welding results from the incorporation of upper (Al 5754) and lower (Al 6111) sheet materials at the top of the thread on the rotating pin. A ribbon of contiguous Al 5754 and Al 6111 lamella is moved downward via the pin thread as the tool rotates during the dwell period in spot welding. A helical vertical rotational flow is created during the dwell period in spot welding because the ribbon of contiguous Al 5754 and Al 6111 lamellae discharged from the bottom of the pin thread moves outward and upward before moving back toward the tool periphery and downward again.
引用
收藏
页码：584 / 595
页数：12
相关论文
共 50 条
  • [1] Intermixing in Dissimilar Friction Stir Spot Welds
    P. Su
    A. Gerlich
    T.H. North
    G.J. Bendzsak
    Metallurgical and Materials Transactions A, 2007, 38 : 584 - 595
  • [2] Cracking in dissimilar Mg alloy friction stir spot welds
    Yamamoto, M.
    Gerlich, A.
    North, T. H.
    Shinozaki, K.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2008, 13 (07) : 583 - 592
  • [3] Evaluation of the formation of intermetallic compounds at the intermixing lines and in the nugget of dissimilar steel/aluminum friction stir welds
    Abd Elnabi, Mohamed M.
    Osman, T. A.
    El Mokadem, A.
    Elshalakany, Abou Bakr
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (05): : 10209 - 10222
  • [4] Interfacial bonding mechanism in Al/coated steel dissimilar refill friction stir spot welds
    Z.Shen
    Y.Ding
    J.Chen
    B.Shalch Amirkhiz
    J.Z.Wen
    L.Fu
    A.P.Gerlich
    Journal of Materials Science & Technology, 2019, 35 (06) : 1027 - 1038
  • [5] Numerical Characteristics of Friction Stir Spot Welds
    Yang, Honggang
    Yang, Haijun
    Zhao, Xin
    PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE ON MECHATRONICS, MATERIALS, CHEMISTRY AND COMPUTER ENGINEERING 2015 (ICMMCCE 2015), 2015, 39 : 1496 - 1499
  • [6] Material flow and intermixing during dissimilar friction stir welding
    Gerlich, A.
    Su, P.
    Yamamoto, M.
    North, T. H.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2008, 13 (03) : 254 - 264
  • [7] Influence of tool thread on mechanical properties of dissimilar Al alloy friction stir spot welds
    Ikuta, A.
    Yin, Y. H.
    North, T. H.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2012, 17 (08) : 622 - 629
  • [8] Dissimilar Al to Mg alloy friction stir welds
    Zettler, Rudolf
    ADVANCED ENGINEERING MATERIALS, 2006, 8 (05) : 415 - 421
  • [9] Dynamic recrystallization in similar 5182 Al/Al and dissimilar Al/Fe friction stir spot welds
    Etter, A. L.
    Bozzi, S.
    Baudin, T.
    RECRYSTALLIZATION AND GRAIN GROWTH IV, 2012, 715-716 : 152 - 157
  • [10] Joint formation in dissimilar Al alloy/steel and Mg alloy/steel friction stir spot welds
    Liyanage, T.
    Kilbourne, J.
    Gerlich, A. P.
    North, T. H.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2009, 14 (06) : 500 - 508
12345