Effect of Particle Size and Shape on the Reinforcing Efficiency of Nanoparticles in Polymer Nanocomposites

被引：39
|
作者：
Hassanabadi, Hojjat Mahi [1 ,2 ]
Rodrigue, Denis [1 ,2 ]
机构：
[1] Univ Laval, Dept Chem Engn, Quebec City, PQ G1V 0A6, Canada
[2] Univ Laval, CERMA, Quebec City, PQ G1V 0A6, Canada
来源：
MACROMOLECULAR MATERIALS AND ENGINEERING | 2014年 / 299卷 / 10期
基金：
加拿大自然科学与工程研究理事会;
关键词：
nanocompositemechanical properties; nanoparticle comparison; polymer nanocomposites; MECHANICAL-PROPERTIES; RHEOLOGICAL PROPERTIES; VISCOELASTIC PROPERTIES; CONDUCTIVITY; FILLER; ORGANOCLAY; STABILITY; VISCOSITY; DYNAMICS; BEHAVIOR;
D O I：
10.1002/mame.201300442
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of particle characteristics such as size and shape on the reinforcing efficiency of nano-particles is investigated. Nanocomposites based on ethylene vinyl acetate (EVA) copolymer containing five different nano-particles including clay, multiwall carbon nanotube (CNT), CaCO3, talc, and nano-crystalline cellulose (NCC) were produced. The analyses are performed in the melt and solid states. The highest property changes were obtained for clay and CNT, followed by talc, NCC, and CaCO3. By using morphological analyses, mechanical properties, and rheological data, the results were correlated to the amount of available surface area between the particles and polymer. Finally, the particles were compared using a material cost over mechanical performance ratio where the optimum was obtained for talc followed by clay, NCC, CNT and CaCO3.
引用
收藏
页码：1220 / 1231
页数：12
相关论文
共 50 条
  • [1] Reinforcing efficiency of nanoparticles: A simple comparison for polymer nanocomposites
    Liu, Hua
    Brinson, L. Catherine
    COMPOSITES SCIENCE AND TECHNOLOGY, 2008, 68 (06) : 1502 - 1512
  • [2] Effect of shape and size of nanofillers on the viscoelasticity of polymer nanocomposites
    Luo, Dandan
    Wu, Haoyu
    Li, Haoxiang
    Zhang, Wenfeng
    Zhang, Liqun
    Gao, Yangyang
    POLYMER, 2022, 246
  • [3] EFFECT OF PARTICLE SHAPE + SIZE DISTRIBUTION IN REINFORCED POLYMER
    BOWEN, RL
    JOURNAL OF THE AMERICAN DENTAL ASSOCIATION, 1964, 69 (04): : 481 - &
  • [4] Heat dissipation in polymer nanocomposites: Effect of filler size and shape
    Ortiz, Joseph
    Raksit, Arpon
    Gersappe, Dilip
    Rafailovich, Miriam
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2012, 243
  • [5] The Effect of Silica Particle Size on the Mechanical Enhancement of Polymer Nanocomposites
    Kontou, Evagelia
    Christopoulos, Angelos
    Koralli, Panagiota
    Mouzakis, Dionysios. E. E.
    NANOMATERIALS, 2023, 13 (06)
  • [6] The reinforcing and characteristics of interphase as the polymer chains adsorbed on the nanoparticles in polymer nanocomposites
    Nikfar, Nafiseh
    Esfandiar, Milad
    Shahnazari, Mohammad Reza
    Mojtahedi, Navid
    Zare, Yasser
    COLLOID AND POLYMER SCIENCE, 2017, 295 (10) : 2001 - 2010
  • [7] The reinforcing and characteristics of interphase as the polymer chains adsorbed on the nanoparticles in polymer nanocomposites
    Nafiseh Nikfar
    Milad Esfandiar
    Mohammad Reza Shahnazari
    Navid Mojtahedi
    Yasser Zare
    Colloid and Polymer Science, 2017, 295 : 2001 - 2010
  • [8] Effect of particle size and grafting density on the mechanical properties of polymer nanocomposites
    Chao, Huikuan
    Riggleman, Robert A.
    POLYMER, 2013, 54 (19) : 5222 - 5229
  • [9] The effect of size and concentration of nanoparticles on the glass transition temperature of polymer nanocomposites
    Serenko, Olga A.
    Roldughin, Vyacheslav I.
    Askadskii, Andrey A.
    Serkova, Elena S.
    Strashnov, Pavel V.
    Shifrina, Zinaida B.
    RSC ADVANCES, 2017, 7 (79): : 50113 - 50120
  • [10] THE EFFICIENCY OF POLYMER NANOCOMPOSITES REINFORCEMENT BY DISPERSE NANOPARTICLES
    Mikitaev, A. K.
    Kozlov, G. V.
    MATERIALS PHYSICS AND MECHANICS, 2014, 21 (01): : 51 - 57
12345