Microstructures and mechanical properties of Mg-Ce-Zn-Zr wrought alloy

被引：19
|
作者：
Wu, WH [1 ]
Xia, CQ [1 ]
机构：
[1] Cent S Univ, Sch Mat Sci & Engn, Changsha 410083, Peoples R China
来源：
JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY | 2004年 / 11卷 / 04期
关键词：
wrought magnesium alloy; microstructure; mechanical property; hot-extrusion; dynamic recrystallization;
D O I：
10.1007/s11771-004-0076-4
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Microstructures and mechanical properties of Mg-2.0 % Ce-0.7 % Zn-0.7 % Zr alloy were studied. The results of scanning electron microscopy show that Mg12Ce phase mainly distributes at the grain boundaries. The fine Mg12Ce phase can apparently elevate recrystallization temperature by preventing the grain boundary migration. No dynamic recrystallization occurs during the hot-extrusion. The mechanical properties of as extruded specimens are sigma(b) = 278.5 MPa, delta = 12.0 %, while those of the specimens annealed at 250 degreesC for 100 h are sigma(b) = 272. 6 MPa, delta = 11.3 %, which indicate that the alloy has good mechanical properties at room temperature.
引用
收藏
页码：367 / 370
页数：4
相关论文
共 50 条
  • [1] Microstructures and mechanical properties of Mg-Ce-Zn-Zr wrought alloy
    Wen-hua Wu
    Chang-qing Xia
    Journal of Central South University of Technology, 2004, 11 : 367 - 370
  • [2] Plastic deformation behaviors of a Mg-Ce-Zn-Zr alloy
    Yu, K
    Li, WX
    Zhao, J
    Ma, ZQ
    Wang, RC
    SCRIPTA MATERIALIA, 2003, 48 (09) : 1319 - 1323
  • [3] Effect of extrusion temperature on microstructure, thermal conductivity and mechanical properties of a Mg-Ce-Zn-Zr alloy
    Hu, Ling-Fei
    Gu, Qin-Fen
    Li, Qian
    Zhang, Jie-Yu
    Wu, Guang-Xin
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 741 : 1222 - 1228
  • [4] Microstructures and mechanical properties of Mg–Zn–Zr–Dy wrought magnesium alloys
    Z H HUANG
    W J QI
    K H ZHENG
    X M ZHANG
    M LIU
    Z M YU
    J XU
    Bulletin of Materials Science, 2013, 36 : 437 - 445
  • [5] Effects of 0.5 wt% Ce addition on microstructures and mechanical properties of a wrought Mg-8Gd-1.2Zn-0.5Zr alloy
    Li, Baishun
    Guan, Kai
    Yang, Qiang
    Niu, Xiaodong
    Zhang, Dongdong
    Yu, Zijian
    Zhang, Xuhu
    Tang, Zongmin
    Meng, Jian
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 763 : 120 - 133
  • [6] Microstructures and mechanical properties of Mg-Zn-Zr-Dy wrought magnesium alloys
    Huang, Z. H.
    Qi, W. J.
    Zheng, K. H.
    Zhang, X. M.
    Liu, M.
    Yu, Z. M.
    Xu, J.
    BULLETIN OF MATERIALS SCIENCE, 2013, 36 (03) : 437 - 445
  • [7] Effects of 0.5 wt% Ce addition on microstructures and mechanical properties of a wrought Mg−8Gd−1.2Zn−0.5Zr alloy
    Li, Baishun
    Guan, Kai
    Yang, Qiang
    Niu, Xiaodong
    Zhang, Dongdong
    Yu, Zijian
    Zhang, Xuhu
    Tang, Zongmin
    Meng, Jian
    Journal of Alloys and Compounds, 2020, 763 : 120 - 133
  • [8] Effect of Ce on microstructures and mechanical properties of rapidly solidified Mg-Zn alloy
    Zhou, T.
    Xia, H.
    Chen, Z. H.
    MATERIALS SCIENCE AND TECHNOLOGY, 2011, 27 (07) : 1198 - 1205
  • [9] Researches on microstructures and mechanical properties of extruded Mg-Zn-Zr-Y alloy
    Peng, Jian
    Liu, Rongshen
    Zhang, Dingfei
    Song, Chengmeng
    PROGRESSES IN FRACTURE AND STRENGTH OF MATERIALS AND STRUCTURES, 1-4, 2007, 353-358 : 715 - 717
  • [10] Microstructures and Mechanical Properties of a Novel Mg-Gd-Y-Zn-Zr Alloy
    Yang, Zhong
    Li, Jianping
    Wang, Yanrong
    Xiong, Biwei
    LIGHT METALS TECHNOLOGY 2013, 2013, 765 : 521 - +
12345