Manufacturing of Composite Structural Material with Porous Aluminum/Dense Steel via Friction Stir Welding Route

被引：4
|
作者：
Hangai, Yoshihiko [1 ]
Koyama, Shinji [1 ]
Utsunomiya, Takao [2 ]
Hasegawa, Makoto [3 ]
机构：
[1] Gunma Univ, Grad Sch Engn, Dept Mech Syst Engn, Kiryuu 3768515, Japan
[2] Shibaura Inst Technol, Res Org Adv Engn, Saitama 3378570, Japan
[3] Yokohama Natl Univ, Grad Sch Engn, Div Mat Sci & Engn, Yokohama, Kanagawa 2408501, Japan
来源：
JOURNAL OF THE JAPAN INSTITUTE OF METALS | 2010年 / 74卷 / 02期
关键词：
porous metals; composite structural material; aluminum; steel; diffusion bonding; foam; friction stir welding; precursor; ALLOY;
D O I：
10.2320/jinstmet.74.131
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
A composite structural material with an "A1050 porous aluminum/SS400 dense steel plate" is fabricated by friction stir welding (FSW), which is used both for mixing blowing agent powder with aluminum plates and for lap joining aluminum and steel plates in the same process. It is shown that, after the aluminum plates are foamed, diffusion bonding is realized and an Fe-Al intermetallic compound is formed at the interface of porous aluminum and dense steel. This is because new surfaces of aluminum and steel plates are formed by FSW, and thus bonding is realized at the interface of these plates immediately after FSW.
引用
收藏
页码：131 / 133
页数：3
相关论文
共 50 条
  • [1] Fabrication of Composite Structural Material with ADC12 Porous Aluminum and Dense Steel by Friction Stir Welding Route
    Hangai, Yoshihiko
    Ishii, Nobuyuki
    Koyama, Shinji
    Utsunomiya, Takao
    Kitahara, Soichiro
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2012, 76 (05) : 349 - 354
  • [2] Manufacturing of sandwich panel with porous aluminum/dense steel plate by friction stir processing route
    Research Organization for Advanced Engineering, Shibaura Institute of Technology, 307 Fukasaku, Minuma-ku, Saitama-shi, Saitama 337-8570, Japan
    Nihon Kikai Gakkai Ronbunshu A, 779 (1013-1016):
  • [3] Fabrication of Aluminum Foam/Dense Steel Composite by Friction Stir Welding
    Hangai, Yoshihiko
    Koyama, Shinji
    Hasegawa, Makoto
    Utsunomiya, Takao
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2010, 41A (09): : 2184 - 2186
  • [4] Fabrication of Aluminum Foam/Dense Steel Composite by Friction Stir Welding
    Yoshihiko Hangai
    Shinji Koyama
    Makoto Hasegawa
    Takao Utsunomiya
    Metallurgical and Materials Transactions A, 2010, 41 : 2184 - 2186
  • [5] Novel approach in manufacturing aluminum-based alternate layered composite material via friction stir additive manufacturing route
    Venkit, Hari
    Selvaraj, Senthil Kumaran
    MATERIALS TODAY COMMUNICATIONS, 2024, 38
  • [6] Friction stir welding of aluminum alloy to steel
    Kimapong, K
    Watanabe, T
    WELDING JOURNAL, 2004, 83 (10) : 277S - 282S
  • [7] Manufacturing of porous titanium using friction stir welding
    Vardak, Shirin
    Shatooti, Soheil
    Zangeneh, Shahab
    MATERIALS LETTERS, 2022, 310
  • [8] Friction stir welding on steel/aluminum sandwich panels
    Mueller, S.
    Volpone, L.M.
    Rivista Italiana della Saldatura, 2008, 60 (04): : 503 - 508
  • [9] Joining of aluminum alloy to steel by friction stir welding
    Watanabe, Takehiko
    Takayama, Hirofumi
    Yanagisawa, Atsushi
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 178 (1-3) : 342 - 349
  • [10] Research progress in friction stir welding of steel and aluminum
    Xu Kai
    Cui Qi-rui
    Li Guo-qiang
    Zhang Shu-quan
    2019 5TH INTERNATIONAL CONFERENCE ON ENERGY MATERIALS AND ENVIRONMENT ENGINEERING, 2019, 295
12345