Surface integrity in finish hard turning of case-hardened steels

被引：154
|
作者：
Rech, J
Moisan, A
机构：
[1] Ecole Natl Ingn St Etienne, LTDS, F-42000 St Etienne, France
[2] Ecole Natl Super Arts & Metiers, LABOMAP, F-71250 Cluny, France
来源：
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 2003年 / 43卷 / 05期
关键词：
hard turnings; residual stresses; white layers; surface integrity;
D O I：
10.1016/S0890-6955(02)00141-4
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Highly stressed steel components, e.g., gears and bearing parts, are appropriate applications for hard turning. Therefore, the process effects on significant engineering properties of work materials have to be carefully analyzed. Roughness, residual stresses, and white layers as parts of surface integrity, are functions of the machining parameters and of the cuttability of the cutting edge, i.e. of the tool wear. The aim of this work was to study the influence of feed rate, cutting speed, and tool wear on the effects induced by hard turning on case-hardened 27MnCr5 gear conebrakes and to point out the technical limitations in mass production. (C) 2003 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码：543 / 550
页数：8
相关论文
共 50 条
  • [1] Surface integrity in finish hard turning of gears
    Rech, J
    Lech, M
    Richon, J
    METAL CUTTING AND HIGH SPEED MACHINING, 2002, : 211 - 220
  • [2] FRACTURE OF CASE-HARDENED STEELS
    MARCUS, HL
    HARRIS, JM
    SCRIPTA METALLURGICA, 1975, 9 (05): : 563 - 568
  • [3] Influence of the Material State of Ground, Case-Hardened Steels on the Barkhausen Noise Depending on the Surface Integrity
    Sackmann, D.
    Heinzel, J.
    Karpuschewski, B.
    HTM-JOURNAL OF HEAT TREATMENT AND MATERIALS, 2021, 76 (01): : 5 - 18
  • [4] Process optimization of finish turning of hardened steels
    Zhang, JingYing
    Liang, Steven Y.
    MATERIALS AND MANUFACTURING PROCESSES, 2007, 22 (01) : 107 - 113
  • [5] Experimental investigation of surface integrity in finish dry hard turning of hardened tool steel at different hardness levels
    Linhu Tang
    Chengxiu Gao
    Jianlong Huang
    Hao Shen
    Xiaojun Lin
    The International Journal of Advanced Manufacturing Technology, 2015, 77 : 1655 - 1669
  • [6] Experimental investigation of surface integrity in finish dry hard turning of hardened tool steel at different hardness levels
    Tang, Linhu
    Gao, Chengxiu
    Huang, Jianlong
    Shen, Hao
    Lin, Xiaojun
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 77 (9-12): : 1655 - 1669
  • [7] Cutting tool edge temperature in finish hard turning of case hardened steel
    Tanaka, Ryutaro
    Morishita, Hiroki
    Lin, Yongchuan
    Hosokawa, Akira
    Ueda, Takashi
    Furumoto, Tatsuaki
    Key Engineering Materials, 2009, 407-408 : 538 - 541
  • [8] Cutting Tool Edge Temperature in Finish Hard Turning of Case Hardened Steel
    Tanaka, Ryutaro
    Morishita, Hiroki
    Lin, Yongchuan
    Hosokawa, Akira
    Ueda, Takashi
    Furumoto, Tatsuaki
    PROGRESS OF MACHINING TECHNOLOGY, 2009, 407-408 : 538 - 541
  • [9] EXAMINATIONS OF FRACTURE TOUGHNESS OF CASE-HARDENED STEELS
    PUSCH, G
    ORTMANN, R
    BLUMENAUER, H
    NEUE HUTTE, 1977, 22 (11): : 641 - 642
  • [10] ABRASION RESISTANCE OF CASE-HARDENED CHROME STEELS
    GAMOLSKA.ZM
    GUTERMAN, VM
    RUSSIAN ENGINEERING JOURNAL-USSR, 1966, 46 (11): : 42 - &
12345