Thermal stability and instrumented indentation in a Mg60Cu30Y10 bulk metallic glass

被引：19
|
作者：
Kovács, Z
Castellero, A
Greer, AL
Lendvai, J
Baricco, M
机构：
[1] Univ Turin, Dipartimento Chim, IFM, I-10125 Turin, Italy
[2] Eotvos Lorand Univ, Dept Gen Practice, H-1117 Budapest, Hungary
[3] Univ Cambridge, Dept Mat Sci & Met, Cambridge CB2 3QZ, England
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2004年 / 387卷
基金：
匈牙利科学研究基金会;
关键词：
bulk metallic glasses; Mg-Cu-Y; instrumented indentation; serrated flow; shear bands;
D O I：
10.1016/j.msea.2004.03.089
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The crystallisation and mechanical properties of the light alloy, Mg60Cu30Y10 bulk metallic glass (BMG) have been investigated by differential scanning calorimetry and instrumented indentation. Generally, the low-temperature plasticity of BMGs can be improved by partial devitrification to give an ultra-fine crystal structure in the amorphous matrix. From the indentation tests, increases in hardness and elastic modulus were observed after both the first and second stages of crystallisation. Plastic instabilities have been observed in the instrumented-indentation loading curves, even for samples with a significant crystallised fraction. (C) 2004 Elsevier B.V. All rights reserved.
引用
收藏
页码：1012 / 1017
页数：6
相关论文
共 50 条
  • [1] Formation and thermal stability of Mg65Cu25Y10 and Mg60Cu30Y10 Mg-based metallic glasses
    Li, Yesheng
    Wu, Ziping
    Dong, Dingqian
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2006, 35 (SUPPL. 2): : 298 - 302
  • [2] Crystallization kinetics of Mg60Cu30Y10 bulk amorphous alloy
    Shao, Yang
    Chen, Gang
    Zhao, Yu-Tao
    Zhang, Zhen-Ya
    Hou, Wen-Sheng
    Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2012, 33 (12): : 25 - 29
  • [3] Influence of Si on glass forming ability and properties of the bulk amorphous alloy Mg60Cu30Y10
    Liu, K. M.
    Zhou, H. T.
    Yang, B.
    Lu, D. P.
    Atrens, A.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (29-30): : 7475 - 7479
  • [4] THERMAL STABILITY OF Cu60Zr30Ti10 BULK METALLIC GLASS
    Balga, Dusan
    Saksl, Karel
    Durisin, Martin
    Szabo, Juraj
    Ostroushko, Dmytro
    Milkovic, Ondrej
    Zubko, Pavol
    METAL 2015: 24TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2015, : 1271 - 1276
  • [5] Formation and thermal stability of Mg65Cu25Y10 and Mg60Cu30Y10Mg-based metallic glasses
    Li Yesheng
    Wu Ziping
    Dong Dingqian
    RARE METAL MATERIALS AND ENGINEERING, 2006, 35 : 298 - 302
  • [6] Microstructural characterization of droplet emulsified Mg60Cu30Y10 powders
    Hong, J. W.
    Kang, H. S.
    Yoon, W. Y.
    Lee, S. M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 449 : 727 - 732
  • [7] Effect of pressure on thermal stability of Mg65Cu25Y10 bulk metallic glass
    Zhang, J
    Zhang, HF
    Quan, M
    Hu, ZQ
    SCRIPTA MATERIALIA, 2003, 49 (06) : 485 - 489
  • [8] Deformation characteristics of Mg60Cu30Y10 alloy at temperatures near Tg
    Wolff, U
    Pryds, N
    Wert, JA
    SCRIPTA MATERIALIA, 2004, 50 (11) : 1385 - 1388
  • [9] Effects of Silicon on Mg60Cu30Y10 Amorphous Alloys Studied by a Nanoindentation Method
    Liu Keming
    Zhou Haitao
    Lu Deping
    Yang Bin
    Zeng Sumin
    RARE METAL MATERIALS AND ENGINEERING, 2010, 39 (10) : 1732 - 1736
  • [10] Effects of silicon on Mg60Cu30Y10 amorphous alloys studied by a nanoindentation method
    Liu, Keming
    Zhou, Haitao
    Lu, Deping
    Yang, Bin
    Zeng, Sumin
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2010, 39 (10): : 1732 - 1736
12345