Thermal analysis for the high duty cycle PIMS accelerator

被引:0
|
作者
Liu Hua-Chang [1 ]
Peng Jun [1 ]
Ruan Yu-Fang [1 ]
Fu Shi-Nian [1 ]
机构
[1] Chinese Acad Sci, Inst High Energy Phys, Accelerator Ctr, Beijing 100049, Peoples R China
关键词
PIMS; high duty cycle; thermal analysis; water-cooling;
D O I
10.1088/1674-1137/34/7/014
中图分类号
O57 [原子核物理学、高能物理学];
学科分类号
070202 ;
摘要
To develop the high power proton linear accelerator for the Accelerator Driven System (ADS) program, the preliminary design of the Pi mode accelerating structure (HMS) has been carried out. It is estimated that PIMS would heat up to 80 degrees C for low duty cycle (0.1%) without water-cooling, which is not acceptable, thus water-cooling is demanded. The structure stability for the high duty cycle or even for CW operation is crucially important for the ADS application. Therefore, thermal analysis with water-cooling for a high duty accelerator in our ADS research is performed to control the frequency shift caused by a temperature rise.
引用
收藏
页码:1005 / 1008
页数:4
相关论文
共 50 条
  • [1] Thermal analysis for the high duty cycle PIMS accelerator
    刘华昌
    彭军
    阮玉芳
    傅世年
    中国物理C, 2010, (07) : 1005 - 1008
  • [2] PROTON RFQ ACCELERATOR WITH HIGH DUTY CYCLE
    SCHEMPP, A
    DEITINGHOFF, H
    JUNIOR, P
    KLEIN, H
    IEEE TRANSACTIONS ON NUCLEAR SCIENCE, 1983, 30 (02) : 1425 - 1427
  • [3] PROTON RFQ ACCELERATOR WITH HIGH DUTY CYCLE.
    Schempp, A.
    Deitinghoff, H.
    Junior, P.
    Klein, H.
    IEEE Transactions on Nuclear Science, 1982, NS-30 (02) : 1425 - 1427
  • [4] Linear Accelerator X-Ray Sources With High Duty Cycle
    Condron, Cathie
    Brown, Craig
    Gozani, Tsahi
    Hernandez, Michael
    Langeveld, Willem G. J.
    APPLICATION OF ACCELERATORS IN RESEARCH AND INDUSTRY, 2013, 1525 : 704 - 708
  • [5] ELECTRON LINEAR ACCELERATOR OF SACLAY WITH LARGE DUTY CYCLE AND HIGH-INTENSITY
    NETTER, F
    BULLETIN D INFORMATIONS SCIENTIFIQUES ET TECHNIQUES DU COMMISSARIAT A L ENERGIE ATOMIQUE, 1973, (179): : 15 - 37
  • [6] Thermal Analysis of a PMSM for an Intermittent Periodic Duty Cycle
    Deaconu, Anca-Simona
    Chirila, Aurel-Ionut
    Navrapescu, Valentin
    Ghita, Constantin
    Deaconu, Ioan-Dragos
    2013 8TH INTERNATIONAL SYMPOSIUM ON ADVANCED TOPICS IN ELECTRICAL ENGINEERING (ATEE), 2013,
  • [7] Charlieplexing at high duty cycle
    Digital Designs, Melbourne, Australia
    EDN, 2009, 13 (44-46)
  • [8] Charlieplexing at high duty cycle
    Sangalli, Luke
    EDN, 2009, 54 (12) : 44 - +
  • [9] A HIGH DUTY CYCLE HIGH STABILITY MONOSTABLE
    FRENCH, RC
    ELECTRONIC ENGINEERING, 1967, 39 (472): : 372 - &
  • [10] Time series analysis of duty cycle induced randomness in thermal lens system
    Raj, Vimal
    Swapna, M. S.
    Kumar, K. Satheesh
    Sankararaman, S.
    OPTIK, 2020, 212