Grain refinement of metal surface using hot shot peening

被引：1
|
作者：
Harada, Yasunori [1 ]
Fukaura, Kenzo [1 ]
Tsuchida, N. [1 ]
机构：
[1] Univ Hyogo, Grad Sch Engn, 2167 Shosya, Himeji, Hyogo 6712280, Japan
来源：
THERMEC 2006, PTS 1-5 | 2007年 / 539-543卷
关键词：
shot peening; grain refinement; recrystallization; surface treatment; hot working; plastic deformation;
D O I：
10.4028/www.scientific.net/MSF.539-543.1080
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, the grain refinement near the surface of metal workpiece using hot shot peening was investigated to improve the surface properties of the workpiece. In this process, the grains were refined due to plastic deformation generated by the collision of a lot of shots under hot working conditions. A model experiment using two shots was carried out to examine the effects of the amount of deformation, the processing temperature and the time interval of the collision on grain size. In the experiment, the workpieces were stainless steel SUS304 and commercially pure copper. It was found that the global surface layer successfully attained to the fine grains by means of hot shot peening.
引用
收藏
页码：1080 / +
页数：2
相关论文
共 50 条
  • [1] Lining of metal plates with foils using hot shot peening
    Harada, Y
    Mori, K
    Maki, S
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1998, 80-1 : 309 - 314
  • [2] Numerical study of grain refinement induced by severe shot peening
    Wang, Cheng
    Wang, Long
    Wang, Xiaogui
    Xu, Yangjian
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2018, 146 : 280 - 294
  • [3] Mesh sensitivity assessment of shot peening finite element simulation aimed at surface grain refinement
    Bagherifard, S.
    Ghelichi, R.
    Guagliano, M.
    SURFACE & COATINGS TECHNOLOGY, 2014, 243 : 58 - 64
  • [4] Influence of Hot Ni Shot Peening on Surface Hot Shortness
    Takemura, Akihiro
    Tanaka, Yasuhiro
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2016, 102 (09): : 27 - 32
  • [5] Formation of surface nanocrystalline structure in steels by shot peening and role of strain gradient on grain refinement by deformation
    Todaka, Yoshikazu
    Umemoto, Minoru
    Watanabe, Yukinori
    Yamazaki, Ayumi
    Wang, Chaohui
    Tsuchiya, Koichi
    ISIJ INTERNATIONAL, 2007, 47 (01) : 157 - 162
  • [6] Partial lining of thin foils to metal surface using shot peening
    Harada, Y
    Matsuo, N
    ADVANCES IN ENGINEERING PLASTICITY AND ITS APPLICATIONS, PTS 1 AND 2, 2004, 274-276 : 433 - 438
  • [7] Role of surface grain refinement in AZ31 Mg alloy by shot peening on surface energy, biomineralization and degradation behavior
    Graddala, Suresh Babu
    Das, V. Chittaranjan
    ENGINEERING RESEARCH EXPRESS, 2024, 6 (04):
  • [8] SHOT FOR METAL PEENING
    HARDER, OE
    GOW, JT
    TRANSACTIONS OF THE AMERICAN SOCIETY FOR METALS, 1945, 35 : 390 - 401
  • [9] Surface Grain Refinement of 304L Stainless Steel by Combined Severe Shot Peening and Reversion Annealing Treatment
    Wu, Xuanpei
    Qi, Zeyou
    Zhou, Zhiling
    Zhang, Hongcheng
    Wu, Weijie
    Wang, Yanfei
    COATINGS, 2020, 10 (05)
  • [10] Numerical Simulation of Surface Grain Refinement of 7050 Aluminum Alloy Induced by Shot Peening Based on Dislocation Density Theory
    Zhai, Aoshuang
    Huang, Xiao
    Wang, Xin
    Xu, Chunling
    Shang, Hongfei
    CHINA SURFACE ENGINEERING, 2023, 36 (02) : 114 - 124
12345