Numerical simulations on reducing the unloading springback with multi-step multi-point forming technology

Multi-point forming (MPF) is an innovative flexible manufacturing technology for three-dimensional sheet metal forming. It replaces the conventional solid dies with a set of height-adjustable discrete punches, called the "punch group". A set of punches can construct various three-dimensional curved surfaces freely and conveniently, through adjusting the relative position of each punch. MPF technology not only saves a significant amount of money and time in the design, manufacture, and adjusting of the dies but it can also be applied to change the deformation path and to improve the forming quality. Unloading springback is an inevitable phenomenon in sheet metal forming using MPF. To control and reduce springback, numerical simulations for the MPF process and the unloading springback are carried out using the explicit-implicit coupled finite element method. Subsequently, influencing factors such as thickness, deformation amount, and material properties of MPF springback are researched to investigate the MPF springback tendency. Next, the multi-step MPF technology is introduced to reduce MPF springback. Based on numerical simulation analysis, it is obviously validated that the unloading springback is decreased when the multi-step MPF method is applied. Finally, it is verified that the equidifferent deformation path and small deformation amount of each forming step can improve the workpiece stress state and minimize the unloading springback effectively by an evaluation result of the deformation path effect on the multi-step MPF.