Analysis and optimisation of cutting parameters for surface roughness in machining Al/SiC particulate composites by PCD tool

被引：15

作者：

Palanikumar, K. ^{[1
]}

Shanmugam, K. ^{[2
]}

Davim, J. Paulo ^{[3
]}

机构：

[1] Sri Sairam Inst Technol, Madras 600044, Tamil Nadu, India

[2] Annamalai Univ, Dept Mfg Engn, Annamalainagar 608002, Tamil Nadu, India

[3] Univ Aveiro, Dept Mech Engn, P-380193 Aveiro, Portugal

来源：

INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY | 2010年 / 37卷 / 1-2期

关键词：

RSM; response surface method; turning; Al/SiC particulate composites; PCD tool; surface roughness; MACHINABILITY; TAGUCHI;

D O I：

10.1504/IJMPT.2010.029463

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Aluminium - silicon carbide reinforced metal matrix (Al/SiC-MMC) composite materials has tremendous application in automobile, aerospace and other industries due to their excellent properties. The machining of these materials are needed to obtain a near-nett shape. In the present work, an attempt has been made to model the surface roughness in machining of Al/SiC-MMC composites through Response Surface Methodology (RSM). Three factors central composite design is employed for carrying out this work. Analysis of variance is used for checking the validity of the model. Optimum machining condition for minimising the Surface roughness is determined using desirability function approach. The influences of different parameters in machining Al/SiC particulate composite have been analysed in detail.

引用

页码：117 / 128

页数：12

共 50 条

[1] Analysis and optimisation of cutting parameters for surface roughness in machining Al/SiC particulate composites by PCD tool
Palanikumar K.
Shanmugam K.
Davim J.P.
International Journal of Materials and Product Technology, 2010, 37 (1-2) : 117 - 128
[2] Development of an empirical model for surface roughness in the machining of Al/SiC particulate composites by PCD tool
Palanikumar, K.
Sivakumar, G.
Davim, J. Paulo
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2008, 32 (2-3): : 318 - 332
[3] MODELING OF MACHINING PARAMETERS TO PREDICT SURFACE ROUGHNESS IN MACHINING AL/SIC PARTICULATE COMPOSITES BY CARBIDE INSERT
Palanikumar, K.
Karthikeyan, R.
MULTIDISCIPLINE MODELING IN MATERIALS AND STRUCTURES, 2008, 4 (04) : 345 - 358
[4] Assessment of factors influencing surface roughness on the machining of Al/SiC particulate composites
Palanikumar, K.
Karthikeyan, R.
MATERIALS & DESIGN, 2007, 28 (05) : 1584 - 1591
[5] Optimisation of machining parameters for minimising cutting forces during machining of Al alloy SiC particle composites
Bhushan, Rajesh Kumar
AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING, 2022, 20 (02) : 372 - 386
[6] Surface Roughness Parameters Evaluation in Machining GFRP Composites by PCD Tool using Digital Image Processing
Sarma, P. M. M. S.
Karunamoorthy, L.
Palanikumar, K.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2009, 28 (13) : 1567 - 1585
[7] Effect of machining parameters on surface roughness and tool wear for 7075 Al alloy SiC composite
Bhushan, Rajesh Kumar
Kumar, Sudhir
Das, S.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2010, 50 (5-8): : 459 - 469
[8] Effect of machining parameters on surface roughness and tool wear for 7075 Al alloy SiC composite
Rajesh Kumar Bhushan
Sudhir Kumar
S. Das
The International Journal of Advanced Manufacturing Technology, 2010, 50 : 459 - 469
[9] Effect of Machining Parameters on the Surface Roughness while Turning Particulate Composites
Rao, Prakash C. R.
Bhagyashekar, M. S.
Narendraviswanath
12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014), 2014, 97 : 421 - 431
[10] Analysis of surface roughness parameters in turning of FRP tubes by PCD tool
Palanikumar, K.
Mata, F.
Davim, J. Paulo
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 204 (1-3) : 469 - 474

← 1 2 3 4 5 →