Laser glazing of plasma-sprayed zirconia coatings

A CO2 laser with cylindrical focal lens has been used to glaze the surface layer of plasma-sprayed ZrO2 -20wt% Y2O3/MCrAlY coatings, Both a continuous-wave laser and a pulsed laser were used in this study, Different parameter settings for power, travel speed, and pulse frequency were used, and their effects on the melting width, melting depth, coupling efficiency, microstructure, surface roughness, and process defects have been evaluated, Results show that the melting width of the glazed track was slightly smaller than the diameter of the raw beam, The melting depth increased with increasing energy density for both a continuous-wave laser and a pulsed laser, The coupling efficiency as about 40 to 65% for a continuous-wave laser, which increased with increasing laser travel speed, but decreased with an increase in energy density, The power density has no significant effect on coupling efficiency, Defects, such as bubbles or depressions, occur easily with a continuous wave laser. A high-quality glazed layer is successfully produced using a pulsed laser, The surface roughness of the plasma-sprayed ceramic coatings,Fas significantly improved by laser glazing, Surface roughness decreased slightly as the pulse frequency increased for the glazed surface. Based on this study, proper processing parameters have been suggested.