Wet-chemical processing of transparent and antiglare conducting ITO coating on plastic substrates

被引：51

作者：

Aegerter, MA ^{[1
]}

Al-Dahoudi, N ^{[1
]}

机构：

[1] Inst Neue Mat gGmbH, D-66123 Saarbrucken, Germany

来源：

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY | 2003年 / 27卷 / 01期

关键词：

sol-gel; transparent conducting coatings; antiglare coatings; ITO; low temperature processing; nanoparticles; plastic substrates;

D O I：

10.1023/A:1022636112130

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The paper reviews a low temperature sol-gel processing of transparent and antiglare conducting Sn doped indium oxide (ITO) coatings. The approach uses already crystalline nanoparticles which can be fully redispersed in an ethanolic sol containing a polymerisable organic binder. Thick single layers up to 600 nm can be deposited by spin and dip coating techniques followed either by a low temperature (<130 degrees C) heat treatment or by a UV light irradiation. Stable resistivity down to 9.5 x 10(-2) Omega cm (sheet resistance of 1.7 k Omega(square) for a 560 nm thick layer) have been obtained, together with high visible transparency (T approximate to 87%), good adhesion (DIN 58196-K2, and 53151) and abrasion resistance (DIN 58-196 G10 and H25) and 1 H hardness. Irradiation through a mask allows to easily pattern the coatings. Antiglare-conducting coatings with adjustable gloss (60 to 80 GU) and maintaining a good optical resolution (>8 lines/nm) were obtained by a conventional spraying technique. These techniques have been successfully applied to several plastic substrates such as polycarbonate (PC), polymethylmetacrylate (PMMA), polyimide, polyethylene (PE) as well as glasses.

引用

页码：81 / 89

页数：9

共 50 条

[1] Wet-Chemical Processing of Transparent and Antiglare Conducting ITO Coating on Plastic Substrates
M.A. Aegerter
N. Al-Dahoudi
Journal of Sol-Gel Science and Technology, 2003, 27 : 81 - 89
[2] Transparent and antiglare conducting coatings deposited by wet chemical processes
Al-Dahoudi, N
Aegerter, MA
ADVANCED MATERIALS FORUM I, 2002, 230-2 : 555 - 558
[3] Wet Coating Deposition of ITO Coatings on Plastic Substrates
N. Al-Dahoudi
M.A. Aegerter
Journal of Sol-Gel Science and Technology, 2003, 26 : 693 - 697
[4] Wet coating deposition of ITO coatings on plastic substrates
Al-Dahoudi, N
Aegerter, MA
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 2003, 26 (1-3) : 693 - 697
[5] Generation of wet-chemical AR-coatings on plastic substrates by use of polymerizable nanoparticles
Oliveira, PW
Krug, H
Frantzen, A
Mennig, M
Schmidt, H
SOL-GEL OPTICS IV, 1997, 3136 : 452 - 461
[6] Reliable wet-chemical cleaning method for sapphire substrates
Zhang, Dan
Gan, Yang
ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2012, 244
[7] Wet-chemical Etching of InGaAs for Advanced CMOS Processing
van Dorp, D. H.
Arnauts, S.
Cuypers, D.
Rip, J.
Holsteyns, F.
De Gendt, S.
SEMICONDUCTOR CLEANING SCIENCE AND TECHNOLOGY 13 (SCST 13), 2013, 58 (06): : 281 - 287
[8] Wet-chemical passivation of Si(111)- and Si(100)-substrates
Angermann, H
Henrion, W
Röseler, A
Rebien, M
MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 2000, 73 (1-3): : 178 - 183
[9] The Synthesis and Coating of Long, Thin Copper Nanowires to Make Flexible, Transparent Conducting Films on Plastic Substrates
Rathmell, Aaron R.
Wiley, Benjamin J.
ADVANCED MATERIALS, 2011, 23 (41) : 4798 - +
[10] Chemical nanotechnology for transparent conducting coatings on thin-glass and plastic-foil substrates
Puetz, J
Aegerter, MA
JOURNAL OF THE SOCIETY FOR INFORMATION DISPLAY, 2005, 13 (04) : 321 - 328

← 1 2 3 4 5 →