Thermal contact resistance between plasma-sprayed particles and flat surfaces

Plasma-sprayed molybdenum and yttria-stabilized zirconia particles (38-63 mu m diameters) were sprayed onto glass and Inconel 625 held at either room temperature or 400 degrees C. Samples of Inconel 625 were also preheated for 3 h, and then air-cooled to room temperature before spraying. Photographs of the splats were captured by using a fast charge-coupled device (CCD) camera. A rapid two-color pyrometer was used to collect thermal radiation from the particles during flight and spreading to follow the evolution of their temperature. The temperature evolution was used to determine the cooling rate of spreading particles. An analytical heat conduction model was developed to calculate the thermal contact resistance at the interface of the plasma-sprayed particles and the surfaces from splat cooling rat's. The analysis showed that thermal contact resistance between the heated or preheated surfaces and the splats was more than an order of magnitude smaller than that on non-heated surfaces held at room temperature. Particles impacting on the heated or preheated surfaces had cooling rates that were significantly larger than those on surfaces held at room temperature, which was attributed to smaller thermal contact resistance. (c) 2006 Elsevier Ltd. All rights reserved.