Modelling effects of short fibres on reinforced glass matrix sintering behaviour

被引：3
|
作者：
Jing, XN [1 ]
He, LH [1 ]
Zhao, JH [1 ]
机构：
[1] Univ Sci & Technol China, CAS, Dept Modern Mech, Key Lab Mech Behav & Design Mat, Hefei 230027, Anhui, Peoples R China
来源：
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING | 2003年 / 11卷 / 01期
关键词：
D O I：
10.1088/0965-0393/11/1/302
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effects of short fibres on sintering kinetics and shrinkage anisotropy during sintering of composite glass powder compacts are analysed in detail. In sintering composites, short fibres are modelled as prolate spheroidal rigid inclusions randomly dispersed in viscous matrix. Based on the Mori-Tanaka mean-field formulation, the fibre orientation distribution and aspect ratio on viscous matrix sintering have been taken into account. The comprehensively qualitative results for the effects of fibres on whole sintering rate and anisotropy varying with fibre different orientation distributions, aspect ratios and volume fractions are computed. Furthermore, the average internal matrix stress and interfacial normal stresses due to incompatible sintering rates are investigated in this paper.
引用
收藏
页码：11 / 19
页数：9
相关论文
共 50 条
  • [1] Influence of the fibre-matrix interface on the behaviour of polypropylene reinforced by short glass fibres above glass transition temperature
    Ségard, E
    Benmedakhene, S
    Laksimi, A
    Laï, D
    COMPOSITES SCIENCE AND TECHNOLOGY, 2002, 62 (15) : 2029 - 2036
  • [2] TENSILE BEHAVIOUR OF GLASS FIBRES REINFORCED CEMENTITIOUS MATRIX FOR MASONRY STRENGTHENING
    Kaddouri, Hajar
    Cherradi, Toufik
    Kourdou, Ibtissam
    Rotaru, Ancuta
    Taranu, Nicolae
    Barbuta, Marinela
    REVISTA ROMANA DE MATERIALE-ROMANIAN JOURNAL OF MATERIALS, 2021, 51 (04): : 520 - 527
  • [3] Influence of short dispersed and short integral glass fibres on the mechanical behaviour of textile-reinforced concrete
    Rabea Barhum
    Viktor Mechtcherine
    Materials and Structures, 2013, 46 : 557 - 572
  • [4] Influence of short dispersed and short integral glass fibres on the mechanical behaviour of textile-reinforced concrete
    Barhum, Rabea
    Mechtcherine, Viktor
    MATERIALS AND STRUCTURES, 2013, 46 (04) : 557 - 572
  • [5] Numerical modelling of the fracture behaviour of a glass matrix composite reinforced with alumina platelets
    Cannillo, V
    Pellacani, GC
    Leonelli, C
    Boccaccini, AR
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2003, 34 (01) : 43 - 51
  • [6] Numerical modelling of elastic behaviour of concrete reinforced with steel short fibres in plane stress conditions
    Lamus, Fabian A.
    Caicedo, Manuel A.
    Linero, Dorian L.
    INGENIERIA E INVESTIGACION, 2011, 31 (01): : 26 - 38
  • [7] Sintering effects in a glass reinforced hydroxyapatite
    Knowles, JC
    Talal, S
    Santos, JD
    BIOMATERIALS, 1996, 17 (14) : 1437 - 1442
  • [8] Damage analysis and the fibre-matrix effect in polypropylene reinforced by short glass fibres above glass transition temperature
    Ségard, E
    Benmedakhene, S
    Laksimi, A
    Laï, D
    COMPOSITE STRUCTURES, 2003, 60 (01) : 67 - 72
  • [9] Dynamic behaviour of cement mortars reinforced with glass and basalt fibres
    Fenu, Luigi
    Forni, Daniele
    Cadoni, Ezio
    COMPOSITES PART B-ENGINEERING, 2016, 92 : 142 - 150
  • [10] Fatigue crack propagation in polypropylene reinforced with short glass fibres
    University of Trento, Dept. Mat. Eng., Via M., Trento, Italy
    Compos. Sci. Technol., 7 (1055-1062):
12345