Development of Ultra-Short Pulse Power Supply Applicable to Micro-ECM

被引：10
|
作者：
Zhang, Y. J. [1 ]
Tang, Y. J. [1 ]
Liu, X. K. [2 ]
Guo, Z. N. [1 ]
Li, F.
机构：
[1] Guangdong Univ Technol, Fac Electromech Engn, Guangzhou 510006, Guangdong, Peoples R China
[2] South China Univ Technol, Sch Mech Engn, Guangzhou, Guangdong, Peoples R China
来源：
ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY XIII, VOL 1: ADVANCED MANUFACTURING TECHNOLOGY AND EQUIPMENT, AND MANUFACTURING SYSTEMS AND AUTOMATION | 2009年 / 626-627卷
关键词：
micro-ECM; nanosecond pulse; power supply; localized machining;
D O I：
10.4028/www.scientific.net/MSF.626-627.369
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A nanosecond pulse power supply for micro-ECM (Electrochemical Machining) has been developed, and the minimum pulse on-time is 50 us. After the influence of ultra-short pulse on micro-ECM was analyzed, complementary chopper circuit was presented to avoid waveform distortion, which can achieve higher pulse frequency. A fast protect circuit was designed, and its response time is less than 5 mu s, which can avoid damaging workpiece and electrical components by switching off machining voltage and step motor as soon as a short circuit was detected A series of ECM experiments using the power supply have been carried out, and results of test have proved that high frequency, short pulse width power supply helps to achieve better quality surface, higher machining accuracy.
引用
收藏
页码：369 / +
页数：2
相关论文
共 50 条
  • [1] Design of a pulse power supply unit for micro-ECM
    Spieser, Alexandre
    Ivanov, Atanas
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 78 (1-4): : 537 - 547
  • [2] Design of a pulse power supply unit for micro-ECM
    Alexandre Spieser
    Atanas Ivanov
    The International Journal of Advanced Manufacturing Technology, 2015, 78 : 537 - 547
  • [3] Ultra-short pulse ECM using electrostatic induction feeding method
    Koyano, T.
    Kunieda, M.
    PROCEEDINGS OF THE SEVENTEENTH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM), 2013, 6 : 390 - 394
  • [4] Three-electrode pulse power supply for micro ECM
    Beijing Key Laboratory of Precision/Ultra-Precision Manufacturing Equipments and Control, Department of Mechanical Engineering, Tsinghua University, Beijing
    100084, China
    不详
    100192, China
    Qinghua Daxue Xuebao, 1600, 3 (266-272):
  • [5] Research on improving the machining accuracy of micro-ECM by nanosecond pulse current
    Jiangsu University, Zhenjiang 212013, China
    不详
    Zhongguo Jixie Gongcheng, 2008, 14 (1716-1719+1723):
  • [6] Development of Gap-width Controlling System for Micro-ECM
    Terada, Atsushi
    Natsu, Wataru
    PROCEEDINGS OF THE 16TH INTERNATIONAL SYMPOSIUM ON ELECTROMACHINING, 2010, 2010, : 357 - 360
  • [7] The Micro-Theory of Ultra-Short Pulse Propagating in Nonlinear Fiber
    Yang Jing Wen
    Xiang Lin Yang
    International Journal of Infrared and Millimeter Waves, 1998, 19 : 963 - 975
  • [8] The micro-theory of ultra-short pulse propagating in nonlinear fiber
    Wen, YJ
    Yang, XL
    INTERNATIONAL JOURNAL OF INFRARED AND MILLIMETER WAVES, 1998, 19 (07): : 963 - 975
  • [9] Ultra-short optical pulse generation in micro OLEDs and the perspective of lasing
    Lenstra, Daan
    Fischer, Alexis P. A.
    Ouirimi, Amani
    Chime, Alex Chamberlain
    Loganathan, Nixson
    Chakaroun, Mahmoud
    JOURNAL OF OPTICS, 2022, 24 (03)
  • [10] Ultra-short pulse simulation for characterising oxide layer formation on stainless steel during μECM
    Hotoiu, Lucian
    Deconinck, Johan
    Diver, Carl
    Tormey, David
    CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2020, 31 : 370 - 376
12345