Effect of martensite volume fraction and abrasive particles size on friction and wear behaviour of a low alloy steel

被引：49
|
作者：
Trevisiol, C. [1 ]
Jourani, A. [1 ]
Bouvier, S. [1 ]
机构：
[1] Univ Technol Compiegne, Sorbonne Univ, CNRS, UMR Roberval 7337,Ctr Rech Royallieu,CS 60 319, F-60203 Compiegne, France
来源：
TRIBOLOGY INTERNATIONAL | 2017年 / 113卷
关键词：
Hardness; Microstructure; Abrasive wear; Friction; CORRELATING MICROSTRUCTURAL FEATURES; DUAL-PHASE STEEL; HIGH-STRESS; TEMPERATURE DISTRIBUTION; MECHANICAL-PROPERTIES; OXIDATIVE WEAR; AISI D2; HARDNESS; FERRITE; RESISTANCE;
D O I：
10.1016/j.triboint.2016.11.001
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Friction tests between a ferrite-martensite dual phase steel, with different martensite volume fractions (48-98%), and an abrasive paper with different sizes (15-200 mu m) under various normal loads (50-110 N) are performed. It is highlighted that low normal loads minimize the wear rate whereas high normal loads minimize the friction coefficient. The lowest abrasive particle size minimizes the wear rate whereas an intermediate one (35 mu m) minimizes the friction coefficient. The wear rate and the friction coefficient decrease with increasing the martensite volume fraction. Conversely to the wear rate, for high normal loads, the friction coefficient becomes insensitive to the martensite volume fraction. It is also noticed that there are combined effects of martensite volume fraction and abrasive particle size on wear mechanisms.
引用
收藏
页码：411 / 425
页数：15
相关论文
共 50 条
  • [1] EFFECT OF MARTENSITE VOLUME FRACTION ON THE EROSIVE WEAR BEHAVIOUR OF DUAL-PHASE AISI 8620 STEEL
    Dagasan, E.
    Odabas, D.
    Gercekcioglu, E.
    JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION, 2008, 14 (04): : 474 - 481
  • [2] Effect of TiC particles on three-body abrasive wear behaviour of low alloy abrasion-resistant steel
    Huang, Long
    Deng, Xiangtao
    Li, Chengru
    Jia, Ye
    Wang, Qi
    Wang, Zhaodong
    WEAR, 2019, 434
  • [3] Effect of abrasive particle size on fraction of debris removed from plowing volume in abrasive wear
    Hisakado, T
    Tanaka, T
    Suda, H
    WEAR, 1999, 236 (1-2) : 24 - 33
  • [4] Wear behaviour of an Al-12% Si alloy reinforced with a low volume fraction of SiC particles
    Tjong, SC
    Wu, SQ
    Liao, HC
    COMPOSITES SCIENCE AND TECHNOLOGY, 1997, 57 (12) : 1551 - 1558
  • [5] Experimental and modelling study of the effect of martensite volume fraction on friction and wear of dual-phase steel at microscopic scale
    Penfornis, C.
    Jourani, A.
    Mazeran, P. -E.
    WEAR, 2021, 484
  • [6] Effect of abrasive particle size on friction and wear behaviour of various microstructures of 25CD4 steel
    Trevisiol, C.
    Jourani, A.
    Bouvier, S.
    6TH INTERNATIONAL CONFERENCE ON FRACTURE FATIGUE AND WEAR (FFW), 2017, 843
  • [7] Effect of martensite volume fraction and tempering time on abrasive wear of ferritic ductile iron with dual matrix
    Sahin, Y.
    Erdogan, M.
    Cerah, M.
    WEAR, 2008, 265 (1-2) : 196 - 202
  • [8] Effect of Martensite Volume Fraction on Oxidative and Adhesive Wear
    Zhang, Yunbo
    Jourani, Abdeljalil
    MATERIALS, 2021, 14 (11)
  • [9] Effect of hardness, microstructure, normal load and abrasive size on friction and on wear behaviour of 35NCD16 steel
    Trevisiol, Celine
    Jourani, Abdeljalil
    Bouvier, Salima
    WEAR, 2017, 388 : 101 - 111
  • [10] Effect of Martensite Morphology on Tribological Behaviour of a Low-Alloy Steel
    C. Trevisiol
    A. Jourani
    S. Bouvier
    Metallography, Microstructure, and Analysis, 2019, 8 : 123 - 134
12345