Superplastic forming and diffusion bonding for honeycomb structure of Ti-6Al-4V alloy

被引：66
|
作者：
Han Wenbo [1 ]
Zhang Kaifeng [1 ]
Wang Guofeng [1 ]
机构：
[1] Harbin Inst Technol, Sch Mat Sci & Engn, Natl Key Lab Precis Hot Proc Met, Harbin 150001, Peoples R China
来源：
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2007年 / 183卷 / 2-3期
关键词：
superplastic forming; diffusion bonding; honeycomb structure; Ti-6Al-4V alloy; SHEET;
D O I：
10.1016/j.jmatprotec.2006.10.041
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Superplastic forming and diffusion bonding (SPF/DB) is a well-established process for the manufacture of components almost exclusively from Ti-6Al-4V sheet material. The SPF/DB with gas pressure control for honeycomb structure is investigated. The optimum parameters are as follows: bonding temperature, T = 1203 K; bonding pressure, P = 10MPa; bonding time, t = 30 min. The effects of microstructure were carried out with the bonded samples. The microstructure shows an excellent bonding at the interfaces. The optimum parameters for the SPF/DB process are as follows: forming temperature, T = 1203 K; forming pressure, P = 0.6 MPa; forming time, t = 60 min. The distribution of thickness after SPF/DB was investigated. (c) 2006 Published by Elsevier B.V.
引用
收藏
页码：450 / 454
页数：5
相关论文
共 50 条
  • [1] Superplastic forming and diffusion bonding for sandwich structure of Ti-6Al-4V alloy
    Han, WB
    Zhang, KF
    Wang, GF
    Zhang, XJ
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2005, 21 (01) : 60 - 62
  • [2] Superplastic Forming and Diffusion Bonding for Sandwich Structure of Ti-6Al-4V Alloy
    Wenbo HAN
    JournalofMaterialsScience&Technology, 2005, (01) : 60 - 62
  • [3] DEVELOPMENT OF SUPERPLASTIC FORMING DIFFUSION BONDING TECHNIQUES FOR TI-6AL-4V ALLOY
    BOSE, K
    BIRLA, NC
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 1984, 37 (05): : 535 - 542
  • [4] Superplastic characteristics and diffusion bonding of Ti-6Al-4V alloy
    Lee, Ho-Sung
    Yoon, Jong-Hoon
    Yi, Yeong-Moo
    Shin, Dong Hyuk
    MECHANICAL BEHAVIOR OF MATERIALS X, PTS 1AND 2, 2007, 345-346 : 549 - +
  • [5] DEVELOPMENT OF SUPERPLASTIC FORMING DIFFUSION BONDING TECHNIQUES FOR Ti-6Al-4V ALLOY.
    Bose, K.
    Birla, N.C.
    Transactions of the Indian Institute of Metals, 1983, 37 (05): : 535 - 542
  • [6] Highly superplastic Ti-6Al-4V sheet for superplastic forming and diffusion bonding.
    Salishchev, GA
    Galeyev, RM
    Valiakhmetov, OR
    Safiullin, RV
    Lutfullin, RY
    Senkov, ON
    Froes, FH
    MATERIALS TECHNOLOGY, 2000, 15 (02) : 133 - 135
  • [7] ISOSTATIC DIFFUSION BONDING OF SUPERPLASTIC TI-6AL-4V
    SALEHI, MT
    PILLING, J
    RIDLEY, N
    HAMILTON, DL
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1992, 150 (01): : 1 - 6
  • [8] Experimental Studies on the Superplastic Forming of Square Shaped Components and Diffusion Bonding Characteristics of Ti-6Al-4V Alloy
    Rayudu, R. K.
    Arunkumar, T.
    Bhattacharya, S. S.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2013, 66 (04) : 313 - 323
  • [9] Superplastic-like forming of Ti-6Al-4V alloy
    Jun Liu
    Ming-Jen Tan
    Yingyot Aue-u-lan
    Meiling Guo
    Sylvie Castagne
    Beng-Wah Chua
    The International Journal of Advanced Manufacturing Technology, 2013, 69 : 1097 - 1104
  • [10] Superplastic-like forming of Ti-6Al-4V alloy
    Liu, Jun
    Tan, Ming-Jen
    Aue-u-lan, Yingyot
    Guo, Meiling
    Castagne, Sylvie
    Chua, Beng-Wah
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 69 (5-8): : 1097 - 1104
12345