Microstructure and texture evolution of Mg alloys during twin-roll casting and subsequent hot rolling

被引：73
|
作者：
Kim, Kyung-Hun [1 ,2 ]
Suh, Byeong-Chan [1 ,2 ]
Bae, Jun Ho [1 ,2 ]
Shim, Myeong-Shik [1 ,2 ]
Kim, S. [3 ]
Kim, Nack J. [1 ,2 ]
机构：
[1] POSTECH, Ctr Adv Aerosp Mat, Pohang 790784, South Korea
[2] POSTECH, GIFT, Pohang 790784, South Korea
[3] Gen Motors R&D Ctr, Warren, MI 48090 USA
来源：
SCRIPTA MATERIALIA | 2010年 / 63卷 / 07期
关键词：
Magnesium alloys; Rolling; Recrystallization; Texture; Twin-roll casting; AZ31 MAGNESIUM ALLOY; MECHANICAL-PROPERTIES; TENSILE PROPERTIES; DEFORMATION; SHEET; BEHAVIOR; STRIP; COMPRESSION; SIMULATION; METALS;
D O I：
10.1016/j.scriptamat.2009.12.010
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Microstructure and texture evolution of Mg-6Zn-1Mn-1Al (ZMA611) and Mg-6Zn-1Y (ZW61) alloys have been investigated. It is shown that recrystallization occurs through a shear (deformation) band nucleation mechanism. Alloy composition has a significant effect on the nature of the deformation bands formed during rolling, resulting in a difference in the orientation of recrystallized grains between the two alloys: double twin-related in ZMA611 and tension twin-related in ZW61. Such a contrast in microstructure results in the two alloys having different (00.2) pole figures. (C) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：716 / 720
页数：5
相关论文
共 50 条
  • [1] Microstructure and texture evolution after twin roll casting and subsequent cold rolling of Al-Mg-Mn aluminium alloys
    Gras, C
    Meredith, M
    Hunt, JD
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 169 (02) : 156 - 163
  • [2] Aging Effect on Texture Evolution during Warm Rolling of ZK60 Alloys Fabricated by Twin-Roll Casting
    Cho, Jae-Hyung
    Chen, Hong-Mei
    Choi, Shi-Hoon
    Kim, Hyoung-Wook
    Kang, Suk-Bong
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2010, 41A (10): : 2575 - 2583
  • [3] Aging Effect on Texture Evolution during Warm Rolling of ZK60 Alloys Fabricated by Twin-Roll Casting
    Jae-Hyung Cho
    Hong-Mei Chen
    Shi-Hoon Choi
    Hyoung-Wook Kim
    Suk-Bong Kang
    Metallurgical and Materials Transactions A, 2010, 41 : 2575 - 2583
  • [4] Microstructure evolution of twin-roll cast Al-Mg alloys during downstream processing
    Karlík, M
    Slámová, M
    Janecek, M
    Homola, P
    KOVOVE MATERIALY-METALLIC MATERIALS, 2002, 40 (05): : 330 - 340
  • [5] Microstructure evolution during homogenization and hot workability of 7055 aluminum alloy produced by twin-roll casting
    Qian, Xiaoming
    Li, Xinle
    Li, Yong
    Xu, Guangming
    Wang, Zhaodong
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2021, 13 (13): : 2536 - 2550
  • [6] Influence of Microstructure Evolution During Twin-Roll Casting on the Properties of Magnesium Sheets
    Kainer, K. U.
    Kurz, G.
    Pakulat, S.
    Letzig, D.
    TMS 2019 148TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS, 2019, : 1677 - 1686
  • [7] The Twin-Roll Casting of Magnesium Alloys
    Park, S. S.
    Park, W. -J.
    Kim, C. H.
    You, B. S.
    Kim, Nack J.
    JOM, 2009, 61 (08) : 14 - 18
  • [8] The twin-roll casting of magnesium alloys
    S. S. Park
    W. -J. Park
    C. H. Kim
    B. S. You
    Nack J. Kim
    JOM, 2009, 61
  • [9] TEXTURE AND MICROSTRUCTURE EVOLUTION DURING ASYMMETRIC ROLLING OF MG ALLOYS
    Cho, Jaehyung
    Kim, Hyung-Wuk
    Kang, Suk-Bong
    MATERIALS PROCESSING AND TEXTURE, 2009, 200 : 473 - 482
  • [10] Evolution of the Cracks, Microstructure, and Properties of AA7020 Twin-Roll Casting Sheets during Warm Rolling Processes
    Zhen Xu
    Longhao Zhu
    Hongbin Wang
    Tan Zhao
    Shengli Li
    Yaohui Jin
    Min Wang
    Journal of Materials Engineering and Performance, 2021, 30 : 8579 - 8588
12345