Effect of NaOH Concentration and Curing Regimes on Compressive Strength of Fly Ash-Based Geopolymer

被引:0
|
作者
Yomthong, Krissanapat [1 ,2 ]
Wattanasiriwech, Darunee [1 ,2 ]
Aungkavattana, Pavadee [3 ]
Wattanasiriwech, Suthee [1 ,2 ]
机构
[1] Mae Fah Luang Univ, Mat Energy & Environm MEE Res Grp, Chiang Rai 57100, Thailand
[2] Mae Fah Luang Univ, Sch Sci, Chiang Rai 57100, Thailand
[3] Natl Nanotechnol Ctr, Khlong Nueng 12120, Thailand
关键词
Geopolymer; fly ash; NaOH concentration; mixing; curing; PARAMETERS;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this study, two processing parameters in preparation of high-strength fly ash based-geopolymer: concentrations of NaOH solution and curing regimes were reexamined. From the study of NaOH solution concentration effect, a sharp rise in compressive strength to 55.7 MPa was observed when the solution concentration was increased from 4 to 6 molar (M). Further increase in the concentration up to 12 M caused the setting time of the paste to increase continuously whereas the compressive strength was slightly improved. As for the various curing regimes, the resulting compressive strength was not significantly different. The suitable curing regime was the one at 90 degrees C in the water-saturated atmosphere for 24 hours, then at room temperature in the water-saturated atmosphere for 72 hours and finally at room temperature in a dry normal atmosphere for 72 hours (90C24h-RT). (C) 2018 Elsevier Ltd. All rights reserved.
引用
收藏
页码:2647 / 2654
页数:8
相关论文
共 50 条
  • [1] Rheology of fly ash-based geopolymer: Effect of NaOH concentration
    Rifaai, Yasser
    Yahia, Ammar
    Mostafa, Ahmed
    Aggoun, Salima
    Kadri, El-Hadj
    CONSTRUCTION AND BUILDING MATERIALS, 2019, 223 : 583 - 594
  • [2] The effect of KOH concentration on setting time and compressive strength of fly ash-based geopolymer
    Rahmiati, Tia
    Azizli, Khairun Azizi
    Man, Zakaria
    Ismail, Lukman
    Nuruddin, Muhd Fadhil
    PROCESS AND ADVANCED MATERIALS ENGINEERING, 2014, 625 : 94 - +
  • [3] EFFECT OF NAOH MOLAR CONCENTRATION ON MICROSTRUCTURE AND COMPRESSIVE STRENGTH OF DOLOMITE/FLY ASH-BASED GEOPOLYMERS
    Azimi, Emy Aizat
    Salleh, M. A. A. Mohd
    Abdullah, Mohd Mustafa Al Bakri
    Aziz, Ikmal Hakem A.
    Hussin, Kamarudin
    Chaiprapa, Jitrin
    Vizureanu, Petrica
    Yoriya, Sorachon
    Nabialek, Marcin
    Wyslocki, Jerzy J.
    ARCHIVES OF METALLURGY AND MATERIALS, 2022, 67 (03) : 993 - 998
  • [4] The influence of curing periods on the compressive strength of fly ash-based geopolymer at different aging times
    Abdulkareem, Omar A.
    Al Bakri, A. M. Mustafa
    Kamarudin, H.
    Nizar, I. Khairul
    ADVANCED MECHANICAL DESIGN, PTS 1-3, 2012, 479-481 : 512 - +
  • [5] Systematic multiscale models to predict the compressive strength of fly ash-based geopolymer concrete at various mixture proportions and curing regimes
    Ahmed, Hemn Unis
    Mohammed, Ahmed Salih
    Mohammed, Azad A.
    Faraj, Rabar H.
    PLOS ONE, 2021, 16 (06):
  • [6] Compressive Strength of Fly ash-based Geopolymer Concrete with a Variable of Sodium Hydroxide (NaOH) Solution Molarity
    Herwani
    Pane, Ivindra
    Imran, Iswandi
    Budiono, Bambang
    THE THIRD INTERNATIONAL CONFERENCE ON SUSTAINABLE INFRASTRUCTURE AND BUILT ENVIRONMENT (SIBE 2017), 2018, 147
  • [7] Investigation of early compressive strength of fly ash-based geopolymer concrete
    Assi, Lateef N.
    Deaver, Edward
    ElBatanouny, Mohamed K.
    Ziehld, Paul
    CONSTRUCTION AND BUILDING MATERIALS, 2016, 112 : 807 - 815
  • [8] Influence of slag as additive on compressive strength of fly ash-based geopolymer
    Li, Zongjin
    Liu, Sifeng
    JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2007, 19 (06) : 470 - 474
  • [9] Compressive Strength and Microstructural Properties of Fly Ash-Based Geopolymer Concrete
    Nagalia, Gaurav
    Park, Yeonho
    Abolmaali, Ali
    Aswath, Pranesh
    JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2016, 28 (12)
  • [10] The Effect of Alkaline Activator Ratio on the Compressive Strength of Fly Ash-Based Geopolymer Paste
    Lazarescu, A. V.
    Szilagyi, H.
    Baera, C.
    Ioani, A.
    INTERNATIONAL CONFERENCE ON INNOVATIVE RESEARCH - ICIR EUROINVENT 2017, 2017, 209