Freeze casting of porous Ni-YSZ cermets

被引：35
|
作者：
Koh, Young-Hag [1 ]
Sun, Jong-Jae [1 ]
Kim, Hyoun-Ee [1 ]
机构：
[1] Seoul Natl Univ, Sch Mat Sci & Engn, Seoul 151742, South Korea
来源：
MATERIALS LETTERS | 2007年 / 61卷 / 06期
基金：
新加坡国家研究基金会;
关键词：
Ni-YSZ; cermets; porous; anode; fuel cells;
D O I：
10.1016/j.matlet.2006.07.009
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Dual-phase porous Ni-YSZ cermets were fabricated via the freeze casting of a ceramic/camphene slurry. After removing the frozen camphene via sublimation at room temperature, the green samples were sintered for 3 h in air at various temperatures, ranging from 1100 to 1350 degrees C, and then reduced in an Ar-5% H-2 atmosphere at 700 degrees C for 3 h. The fabricated Ni-YSZ cermets showed 3-D pore channels formed by the replication of the entangled camphene dendrite network and small pores in the Ni-YSZ walls produced by partial sintering of the NiO-YSZ composite. Furthermore, the fabricated samples were found to possess reasonable electrical conductivities, thus rendering them suitable for use as the basic components of planar solid oxide fuel cells (SOFCs). (c) 2006 Elsevier B.V. All rights reserved.
引用
收藏
页码：1283 / 1287
页数：5
相关论文
共 50 条
  • [1] Laser drilling of Ni-YSZ cermets
    Gurauskis, J.
    Sola, D.
    Pena, J. I.
    Orera, V. M.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2008, 28 (14) : 2673 - 2680
  • [2] Effective modulus and coefficient of thermal expansion of Ni-YSZ porous cermets
    Johnson, Janine
    Qu, Jianmin
    JOURNAL OF POWER SOURCES, 2008, 181 (01) : 85 - 92
  • [3] Fabrication and properties of Ni-YSZ and Ni-Co-YSZ cermets
    Shao, Gang-Qin
    Li, Yong
    Duan, Xing-Long
    Cai, Hu
    Li, Jia
    Shi, Xiao-Liang
    Guo, Jing-Kun
    INTERNATIONAL JOURNAL OF NANOSCIENCE, VOL 5, NOS 2 AND 3, 2006, 5 (2-3): : 225 - +
  • [4] Fabrication and properties of Ni-YSZ and Ni-Co-YSZ cermets
    State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, 122 Luoshi Road, Wuhan 430070, China
    Int. J. Nanosci., 2006, 2-3 (225-231):
  • [5] Understanding of redox behavior of Ni-YSZ cermets
    Zhang, Yun
    Liu, Bin
    Tu, Baofeng
    Dong, Yonglai
    Cheng, Mojie
    SOLID STATE IONICS, 2009, 180 (36-39) : 1580 - 1586
  • [6] Preparation of High Porous Ni-YSZ Cermets Electrodes and Their Application for Methanol Oxidation
    Garcia, Eric M.
    Taroco, Hosane A.
    Matencio, Tulio
    Domingues, Rosana Z.
    de Oliveira, Ione M. F.
    Calado, Hallen D. R.
    Lins, Vanessa F. C.
    ELECTROCATALYSIS, 2013, 4 (02) : 71 - 75
  • [7] Preparation of High Porous Ni-YSZ Cermets Electrodes and Their Application for Methanol Oxidation
    Eric M. Garcia
    Hosane A. Tarôco
    Tulio Matencio
    Rosana Z. Domingues
    Ione M. F. de Oliveira
    Hallen D. R. Calado
    Vanessa F. C. Lins
    Electrocatalysis, 2013, 4 : 71 - 75
  • [8] YSZ-Induced crystallographic reorientation of ni particles in Ni-YSZ cermets
    Laguna-Bercero, Miguel A.
    Larrea, Angel
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2007, 90 (09) : 2954 - 2960
  • [9] Processing microstructure property correlation of porous Ni-YSZ cermets anode for SOFC application
    Pratihar, SK
    Dassharma, A
    Maiti, HS
    MATERIALS RESEARCH BULLETIN, 2005, 40 (11) : 1936 - 1944
  • [10] Effects of sinterability of YSZ powder and NiO content on characteristics of Ni-YSZ cermets
    Matsushima, T
    Ohrui, H
    Hirai, T
    SOLID STATE IONICS, 1998, 111 (3-4) : 315 - 321
12345