The Design of the Oil Motive of the 50MW Grade Steam Turbine Governing Valve

被引：0

作者：

Sun, Hong-Mei ^{[1
]}

Zhang, Zi-Jian ^{[2
]}

Wen, Jia ^{[1
]}

机构：

[1] Beijing Polytech, Beijing 100176, Peoples R China

[2] Beijing Beizhong Steam Turbine Co Ltd, Beijing, Peoples R China

来源：

2015 INTERNATIONAL CONFERENCE ON ENVIRONMENT, MANUFACTURING INDUSTRY AND ECONOMIC DEVELOPMENT, (EMIED 2015) | 2015年

关键词：

Oil Motive; Valve; Lifting Force; Supply Pressure;

D O I：

暂无

中图分类号：

X [环境科学、安全科学];

学科分类号：

08 ; 0830 ;

摘要：

In the design of steam turbine, because of the increase of power, the parameters of the steam turbine can not change, but by increasing the steam turbine to increase the power, so we must design an oil engine to meet the valve opening to meet the lifting force. At the beginning of the design, the various forces are calculated, such as the steam force R, the spring force P, the friction force F, the gravity G, etc.. Through the balance of power, the maximum power point of the oil is found, and the stroke is determined by the rotation of the cam of the mechanism.

引用

页码：383 / 392

页数：10

共 50 条

[1] Revival of a 50-MW steam turbine
East, John
Eisenmann, Bob
Sulzer Technical Review, 2002, 84 (01):
[2] Study on Valve Management of Nozzle Governing Steam Turbine
Sun, You-yuan
2017 29TH CHINESE CONTROL AND DECISION CONFERENCE (CCDC), 2017, : 891 - 894
[3] Characteristic Model of Combined Governing Valve and Governing Stage and Optimization of Steam Distribution of Steam Turbine
Zhang H.
Xu J.
Sun Y.
Huang X.
Chen X.
Huangfu Z.
Zhou L.
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2019, 55 (18): : 165 - 172
[4] Investigation on Flow Field in Shaped Governing Valve of Steam Turbine
Tu, S.
Wang, T.
Dong, D.
6TH INTERNATIONAL SYMPOSIUM ON MULTIPHASE FLOW, HEAT MASS TRANSFER AND ENERGY CONVERSION, 2010, 1207 : 653 - 658
[5] Capacity expansion on the 50 MW extraction steam turbine units
Chai, Qin-Hu
Ding, Yan-Jun
Chen, Ming
Zhang, De-Hua
Qilunji Jishu/Turbine Technology, 2001, 43 (06):
[6] Creep damage assessment of a 50 MW steam turbine shaft
Nurbanasari, Meilinda
Suratman, Rochim
2015 2ND INTERNATIONAL CONFERENCE ON MECHATRONICS AND MECHANICAL ENGINEERING (ICMME 2015), 2015, 34
[7] Influence of valve governing mode on solid particle erosion and efficiency in governing stage of steam turbine
Cao, Li-hua
Liu, Shuang
Li, Yan-chao
Si, He-yong
ENERGY, 2020, 191 (191)
[8] Optimization Research on Nozzle Governing 600MW Steam Turbine Operation
Li, Ling
Xu, Jian-qun
Li, Gang
Zhou, Ke-yi
Shi, Yong-feng
2011 ASIA-PACIFIC POWER AND ENERGY ENGINEERING CONFERENCE (APPEEC), 2011,
[9] Numerical analysis of flow field and noise generation within the main stop and governing valve of a 1000 MW supercritical steam turbine
College of Mechanical and Power Engineering, Shanghai Jiaotong University, Shanghai 200030, China
不详
Dongli Gongcheng, 2007, 3 (401-405):
[10] Optimization of Steam Governing Arrangement for 600MW Sub-critical Steam Turbine Unit
Guo, Di
Hu, Nian-su
Wang, Jian-mei
Huang, Mei
Liu, Yong-hui
Yi, Zhao-hui
2010 ASIA-PACIFIC POWER AND ENERGY ENGINEERING CONFERENCE (APPEEC), 2010,

← 1 2 3 4 5 →