EFFECT OF DEGASSING AND GRAIN REFINEMENT ON HOT TEARING TENDENCY IN Al8Si3Cu ALLOY

被引：13

作者：

Uludag, Muhammet ^{[1
]}

Cetin, Remzi ^{[2
]}

Dispinar, Derya ^{[3
]}

Tiryakioglu, Murat ^{[4
]}

机构：

[1] Bursa Tech Univ, Met & Mat Engn, Bursa, Turkey

[2] Karatay Univ, Engn Fac, Konya, Turkey

[3] Istanbul Univ, Engn Fac, Istanbul, Turkey

[4] Univ North Florida, Sch Engn, Jacksonville, FL USA

来源：

INTERNATIONAL JOURNAL OF METALCASTING | 2018年 / 12卷 / 03期

关键词：

casting; aluminum alloys; grain refining; simulation; hot tearing; REDUCED PRESSURE TEST; ALUMINUM-ALLOYS; TEMPERATURE; MECHANISMS; BEHAVIOR; CRACKING; TI;

D O I：

10.1007/s40962-017-0197-9

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The effect of melt quality on hot tearing susceptibility of Al8Si3Cu alloy was examined under six different conditions, by using a traditional T-shaped mold. Grain refinement was carried out by two different modifiers: AlTi5B1 and Al3B. For each test, samples were cast before and after degassing of melt. Therefore, a new hot tearing tendency index was developed by both bifilm calculations and porosity that occurred in the middle of T-zone of casting parts. Results indicated that hot tearing of cast aluminum alloys was a complex phenomenon, and bifilms play a major role, especially by compensating for shrinkage and consequently contributing to the inconsistencies in results.

引用

页码：589 / 595

页数：7

共 50 条

[1] Effect of Degassing and Grain Refinement on Hot Tearing Tendency in Al8Si3Cu Alloy
Muhammet Uludağ
Remzi Çetin
Derya Dispinar
Murat Tiryakioğlu
International Journal of Metalcasting, 2018, 12 : 589 - 595
[2] Effect of mould temperature, grain refinement and modification on hot tearing test in Al-7Si-3Cu alloy
Rathi, Sachin Kumar
Sharma, Ashok
Di Sabatino, Marisa
ENGINEERING FAILURE ANALYSIS, 2017, 79 : 592 - 605
[3] Role of Grain Refinement in the Hot Tearing of Cast Al-Cu Alloy
Shimin Li
Kumar Sadayappan
Diran Apelian
Metallurgical and Materials Transactions B, 2013, 44 : 614 - 623
[4] Role of Grain Refinement in the Hot Tearing of Cast Al-Cu Alloy
Li, Shimin
Sadayappan, Kumar
Apelian, Diran
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2013, 44 (03): : 614 - 623
[5] Effect of Degassing on Hot Tearing Tendency of A206 Aluminum Cast Alloy
Mohamad Reza Nasresfahani
Behzad Niroumand
International Journal of Metalcasting, 2020, 14 : 538 - 546
[6] Effect of Degassing on Hot Tearing Tendency of A206 Aluminum Cast Alloy
Nasresfahani, Mohamad Reza
Niroumand, Behzad
INTERNATIONAL JOURNAL OF METALCASTING, 2020, 14 (02) : 538 - 546
[7] Degassing effect and grain refinement of Al-Si alloy under ultrasound field
Qie Xiwang
Li Jie
Ma Xiaodong
Zhang Zhongtao
Li Tingju
ACTA METALLURGICA SINICA, 2008, 44 (04) : 414 - 418
[8] Effect of Hot Rolling on Grain Refining Performance of Al-5Ti-1B Master Alloy on Hot Tearing on Al-7Si-3Cu Alloy
Rathi, Sachin Kumar
Sharma, Ashok
Di Sabatino, Marisa
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2018, 71 (12) : 3089 - 3093
[9] Effect of molybdenum disulfide nanofluid application as coolant in milling process of Al8Si3Cu aluminum alloy
Ghavidel, Ayub Karimzad
Seyedzavvar, Mirsadegh
Shabgard, Mohammadreza
INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2018, 25 (05) : 397 - 405
[10] Effect of Returnable Material in Batch on Hot Tearing Tendency of AlSi9Cu3 Alloy
Kasinska, Justyna
Matejka, Marek
Bolibruchova, Dana
Kuris, Michal
Siranec, Lukas
MATERIALS, 2021, 14 (07)

← 1 2 3 4 5 →