Shallow mixing layers between non-parallel streams in a flat-bed wide channel

When two converging flows of unequal velocities and different flow directions come into contact, large-scale coherent structures are generated. For shallow conditions and small angles between the incoming streams, the mixing layer (ML) forming downstream of the confluence apex contains quasi-two-dimensional, Kelvin-Helmholtz (KH) vortices. Due to flow shallowness (e.g. stabilizing effect of bed friction), these vortices gradually lose their coherence at large distances from the ML origin. For large angles between the incoming streams, the spatial development of the shallow ML is more complex as strongly coherent, streamwise-oriented-vortical (SOV) cells form in the vicinity of the shallow ML and helical cells of secondary flow are generated due to curvature effects. The present paper uses three-dimensional eddy-resolving numerical simulations to study the effects of varying the angles between the two incoming channels and the downstream channel, the velocity ratio (VR) of the incoming flows and the flow depth on flow, turbulence structure and sediment entrainment mechanisms inside the ML and its surroundings. The simulations are performed for highly idealized conditions in which the ML develops in a wide channel (no interactions with the channel banks), over a flat bed and the flow depth is constant. Simulation results show that the SOV cells play an important role in the redistribution of the streamwise momentum. Some of the SOV cells are subject to bimodal oscillations in the lateral direction which induce strong interactions between the SOV cells and the ML vortices and sharply increase mixing. As for the case of a shallow ML developing between parallel streams, vortex pairing ceases some distance from the ML origin, the KH vortices start losing their coherence and the ML assumes an undulatory shape. The paper describes the effects of VR, angle between the incoming streams (alpha = 0 degrees and 60 degrees), planform geometry (symmetric vs. asymmetric confluences with alpha = 60 degrees) and flow shallowness on the transverse shift of the ML centreline, ML width, dynamics of the KH vortices and on the formation, position and circulation of the SOV cells. In most of the alpha = 60 degrees cases, the largest bed shear stresses are induced beneath the SOV cells rather than beneath the high-speed stream and the SOV cells play a major role in enhancing mixing between the two streams.