Bending energy absorption of self-reinforced poly(ethylene terephthalate) composite sandwich beams

被引：32
|
作者：
Schneider, C. [1 ]
Zenkert, D. [1 ]
Deshpande, V. S. [2 ]
Kazemahvazi, S. [1 ,2 ]
机构：
[1] KTH, Dept Aeronaut & Vehicle Engn, Stockholm, Sweden
[2] Univ Cambridge, Dept Engn, Cambridge CB2 1PZ, England
来源：
COMPOSITE STRUCTURES | 2016年 / 140卷
关键词：
Ductile composites; Structural properties; Energy absorption; Sandwich beams; COMPRESSION;
D O I：
10.1016/j.compstruct.2015.12.043
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
Fully recyclable corrugated sandwich beams made from self-reinforced poly(ethylene terephthalate) SrPET are manufactured and tested in quasi-static three-point bending. For a constant areal mass, the influence of mass distribution on peak load and energy absorption is investigated. Beams with a higher proportion of their mass distributed in the core generally show higher peak loads and energy absorption. A finite element (FE) model was developed using an anisotropic visco-plastic constitutive material law. The FE predictions are in excellent agreement with the measurements. When comparing to sandwich beams with similar weight and geometry of different materials, the SrPET sandwich beams outperform corrugated sandwich beams made from aluminium in terms of peak load and energy absorption. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码：582 / 589
页数：8
相关论文
共 50 条
  • [1] Influence of fibre stretching on the microstructure of self-reinforced poly(ethylene terephthalate) composite
    Jerpdal, Lars
    Stahlberg, Daniel
    Akermo, Malin
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2016, 35 (22) : 1634 - 1641
  • [2] Effect of core corrugation angle on static compression of self-reinforced PP sandwich panels and bending energy absorption of sandwich beams
    Imran, Ali
    Qi, Shijie
    Shi, Pengcheng
    Imran, Muhammad
    Liu, Dong
    Zhu, Yingdan
    Yang, Guilin
    JOURNAL OF COMPOSITE MATERIALS, 2021, 55 (07) : 897 - 913
  • [3] Dynamic compression response of self-reinforced poly(ethylene terephthalate) composites and corrugated sandwich cores
    Schneider, C.
    Kazemahvazi, S.
    Zenkert, D.
    Deshpande, V. S.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2015, 77 : 96 - 105
  • [4] Investigation of mass distribution between core and face sheet on bending energy absorption of self-reinforced PP sandwich beams
    Ali, Imran
    Qi, Shijie
    Shi, Pengcheng
    Ammar, Muhammad
    Ali, Awais
    THIN-WALLED STRUCTURES, 2021, 159
  • [5] Influence of fibre shrinkage and stretching on the mechanical properties of self-reinforced poly(ethylene terephthalate) composite
    Jerpdal, Lars
    Akermo, Malin
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2014, 33 (17) : 1644 - 1655
  • [6] Fabrication and mechanical properties of self-reinforced poly(ethylene terephthalate) composites
    Chen, J. C.
    Wu, C. M.
    Pu, F. C.
    Chiu, C. H.
    EXPRESS POLYMER LETTERS, 2011, 5 (03): : 228 - 237
  • [7] DAMPING CHARACTERISTICS IDENTIFICATION OF SELF-REINFORCED POLY-ETHYLENE TEREPHTHALATE
    Velea, Marian Nicolae
    Lache, Simona
    Rosca, Loan Calin
    PROCEEDINGS OF THE ROMANIAN ACADEMY SERIES A-MATHEMATICS PHYSICS TECHNICAL SCIENCES INFORMATION SCIENCE, 2016, 17 (04): : 336 - 343
  • [8] Compression and tensile properties of self-reinforced poly(ethylene terephthalate)-composites
    Schneider, C.
    Kazemahvazi, S.
    Akermo, M.
    Zenkert, D.
    POLYMER TESTING, 2013, 32 (02) : 221 - 230
  • [9] Impact response of ductile self-reinforced composite corrugated sandwich beams
    Schneider, C.
    Kazemahvazi, S.
    Russell, B. P.
    Zenkert, D.
    Deshpande, V. S.
    COMPOSITES PART B-ENGINEERING, 2016, 99 : 121 - 131
  • [10] Process induced shape distortions of self-reinforced poly(ethylene terephthalate) composites
    Jerpdal, L.
    Akermo, M.
    Stahlberg, D.
    Herzig, A.
    COMPOSITE STRUCTURES, 2018, 193 : 29 - 34
12345