Incomplete Austenitization of Patched Blanks in Hot Forming Die Quenching

被引：0
|
作者：
Jhajj, Kamalpreet S. [1 ]
Daun, Kyle J. [1 ]
Wells, Mary A. [1 ]
Slezak, Stan R. [2 ]
机构：
[1] Univ Waterloo, Dept Mech & Mechatron Engn, 200 Univ Ave W, Waterloo, ON N2L 3G1, Canada
[2] Formet Ind, Waterloo, ON N5P 4J5, Canada
来源：
HOT SHEET METAL FORMING OF HIGH-PERFORMANCE STEEL CHS2 (5TH INTERNATIONAL CONFERENCE) | 2015年 / 05期
关键词：
HEAT-TRANSFER; CONVECTION;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In hot forming die quenching (HFDQ) patched blanks are sometimes used to locally-enhance the crash performance of the as-formed part. Occasionally, however, the patched regions are not fully austenitized, resulting in soft ferrite in the formed part. This paper investigates the origins of incomplete austenitization of patched blanks, and evaluates several candidate remediation strategies. Detailed heat transfer models of single gage and patched blanks are derived and used to predict the occurrence of incomplete austenitization. Various strategies to optimize the heating process for patched blanks are proposed and evaluated, including the use of a high emissivity coating to compensate for the increased thermal mass of the patch.
引用
收藏
页码：489 / 497
页数：9
相关论文
共 50 条
  • [1] Electroslag remelting in hot forming die blanks
    Nikitenko, E.V.
    Avchukhov, Yu.A.
    Litejnoe Proizvodstvo, 1998, (04):
  • [2] Heat Transfer Coefficient Characterization during Hot Forming Die Quenching of Boron Steel Blanks
    Caron, Etienne J. F. R.
    Daun, Kyle J.
    Wells, Mary A.
    HOT SHEET METAL FORMING OF HIGH-PERFORMANCE STEEL CHS2 (4TH INTERNATIONAL CONFERENCE), 2013, (04): : 407 - 414
  • [3] DEVELOPMENT OF A THERMO-METALLURGICAL MODEL TO PREDICT HEATING AND AUSTENITIZATION OF 22MNB5 FOR HOT FORMING DIE QUENCHING
    Verma, M.
    Cuiham, J. R.
    Di Ciano, M.
    Daun, K. J.
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2017 VOL 8, 2018,
  • [4] Direct contact heating for hot forming die quenching
    Rasera, J. N.
    Daun, K. J.
    Shi, C. J.
    D'Souza, M.
    APPLIED THERMAL ENGINEERING, 2016, 98 : 1165 - 1173
  • [5] DIRECT CONTACT HEATING FOR HOT FORMING DIE QUENCHING
    Rasera, J. N.
    Daun, K. J.
    D'Souza, M.
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2014, VOL 2A, 2014,
  • [6] Tailoring by Direct Contact Heating During Hot Forming/Die Quenching
    Field, Natalie N.
    Di Ciano, Massimo
    Gerlich, Adrian P.
    Daun, Kyle J.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2019, 50A (08): : 3705 - 3713
  • [7] Tailoring by Direct Contact Heating During Hot Forming/Die Quenching
    Natalie N. Field
    Massimo Di Ciano
    Adrian P. Gerlich
    Kyle J. Daun
    Metallurgical and Materials Transactions A, 2019, 50 : 3705 - 3713
  • [8] Intercritical Annealing of 22MnB5 for Hot Forming Die Quenching
    Yan, Haotian
    Di Ciano, Massimo
    Verma, Mohit
    Daun, Kyle J.
    INTERNATIONAL DEEP DRAWING RESEARCH GROUP 37TH ANNUAL CONFERENCE, 2018, 418
  • [9] Research of blanks precision for hot die forging
    Kuznechno Shtampovochnoe Proizvod, 2 (33-35):
  • [10] HIGH TEMPERATURE HEAT TRANSFER DURING HOT FORMING DIE QUENCHING OF BORON STEEL
    Caron, Etienne
    Daun, Kyle J.
    Wells, Mary A.
    PROCEEDINGS OF THE ASME SUMMER HEAT TRANSFER CONFERENCE - 2013, VOL 3, 2014,
12345