Creep Life Prediction for P91/12Cr1MoV Dissimilar Joint Based on the Omega Method

被引：11
|
作者：
Chen, H. [1 ]
Zhu, G. R. [1 ]
Gong, J. M. [2 ]
机构：
[1] Ningbo Special Equipment Inspect & Res Inst, Ningbo 315048, Zhejiang, Peoples R China
[2] Nanjing Tech Univ, Nanjing 210009, Peoples R China
来源：
PRESSURE VESSEL TECHNOLOGY: PREPARING FOR THE FUTURE | 2015年 / 130卷
关键词：
Dissimilar joint; Creep behaviour; Omega method;
D O I：
10.1016/j.proeng.2015.12.281
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
P91/12Cr1MoV dissimilar steel welded joints are widely used in the superheater and reheater tubes at elevated temperature. Therefore, it is of great significance to predict the creep rupture life of the P91/12Cr1MoV dissimilar joint for safe operation. In this paper, Omega method was used to predict the creep curve of T91/12Cr1MoV dissimilar joint based on the creep test results. The predicted life was found to be invariably above the experimental result, and was in close relationship with the Omega value. A larger value can be obtained from lower stress, and the results obtained from lower stress are more close to the experimental ones. (C) 2015 The Authors. Published by Elsevier Ltd.
引用
收藏
页码：1143 / 1147
页数：5
相关论文
共 50 条
  • [1] THE EFFECT OF CARBON DIFFUSION ON CREEP BEHAVIOURS FOR A DISSIMILAR JOINT BETWEEN P91 AND 12CR1MOV STEELS
    Zhao, Yanping
    Gong, Jianming
    Jiang, Yong
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2016, VOL 5, 2017,
  • [2] Creep behaviour of P91/GTR-2CM/12Cr1MoV dissimilar joint predicted by the modified Theta method
    Zhao, Yanping
    Gong, Jianming
    Yong, Jiang
    MATERIALS AT HIGH TEMPERATURES, 2017, 34 (04) : 260 - 271
  • [3] Effect of repair welding on the creep behavior of a 12Cr1MoV/GTR-2CM/P91 dissimilar joint
    Zhao, Y. P.
    Gong, J. M.
    Jiang, Y.
    Li, Q. N.
    Wang, X. W.
    PRESSURE VESSEL TECHNOLOGY: PREPARING FOR THE FUTURE, 2015, 130 : 509 - 516
  • [4] Carbon diffusion in dissimilar joints between P91 and 12Cr1MoV steels welded by different consumables at high temperature
    Zhao, Y.
    Gong, J.
    Wang, X.
    Gao, W.
    Li, Q.
    MATERIALS AT HIGH TEMPERATURES, 2015, 32 (06) : 557 - 565
  • [5] P91集箱与12Cr1MoV端盖的焊接技术
    吴志亚
    张建军
    焊接, 2009, (06) : 48 - 50+75
  • [6] Effect of start/stop position distribution on residual stresses in the multi-pass welded 12Cr1MoV/P91 dissimilar pipe
    Zhao, Yanping
    Gong, Jianming
    Wang, Yanfei
    Wei, Gao
    INTERNATIONAL JOURNAL OF STEEL STRUCTURES, 2014, 14 (03) : 539 - 546
  • [7] Effect of start/stop position distribution on residual stresses in the multi-pass welded 12Cr1MoV/P91 dissimilar pipe
    Yanping Zhao
    Jianming Gong
    Yanfei Wang
    Gao Wei
    International Journal of Steel Structures, 2014, 14 : 539 - 546
  • [8] 异种钢P91/12Cr1MoV多道焊的残余应力分析
    丁依龙
    赵燕萍
    巩建鸣
    姜勇
    化工机械, 2014, 41 (06) : 774 - 776
  • [9] Numerical simulation and analysis of welding residual stress in T91/12Cr1MoV dissimilar welded joint
    Gao, Wei
    Jiang, Yong
    Gong, Jianming
    Chen, Hu
    Zhu, Guorong
    Shen, Limin
    Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2012, 32 (26): : 126 - 131
  • [10] Appraisement of creep properties of 12Cr1MoV steel by Small Punch creep test method
    Chen, G
    Zhai, PC
    Shao, AJ
    FUNCTIONALLY GRADED MATERIALS VIII, 2005, 492-493 : 545 - 550
12345