Grinding monitoring system based on power and acoustic emission sensors

被引：0
|
作者：
Karpuschewski, B [1 ]
Wehmeier, M [1 ]
Inasaki, I [1 ]
机构：
[1] Keio Univ, Dept Syst Design Engn, Yokohama, Kanagawa 223, Japan
来源：
CIRP ANNALS 2000: MANUFACTURING TECHNOLOGY | 2000年
关键词：
grinding; dressing; acoustic emission;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Improvement of monitoring techniques is essential to make the complex grinding and dressing process more reliable, economical and user friendly. A system utilizing data fusion from different sensor sources and Al methods combined with a graphical user interface has been applied for this purpose. The main task of the grinding monitoring system is the detection of disturbances and the grinding cycle optimization based on the AE and power signal. The influence of different dressing parameters on the AE-signal has been investigated and a dressing monitoring system is proposed. Reliable data acquisition techniques, which make a continuous scanning of such wide bandwidth signals possible, have been applied.
引用
收藏
页码：235 / 240
页数：6
相关论文
共 50 条
  • [1] Grinding monitoring system based on power and acoustic emission sensors
    Karpuschewski, B.
    Wehmeier, M.
    Inasaki, I.
    CIRP Annals - Manufacturing Technology, 2000, 49 (01) : 235 - 240
  • [2] Research on the Monitoring System of CNC Grinding Process Based on Acoustic Emission
    HU ZhongxiangTENG JiaxuYANG JunweiHUO XiaojingSHI Xiaojun National Key Laboratory for RemanufacturingBeijing ChinaME Engineering College of Hebei Agricultural UniversityBaoding China
    武汉理工大学学报, 2006, (S1) : 310 - 313
  • [3] Research on the monitoring system of CNC grinding process based on acoustic emission
    National Key Laboratory for Remanufacturing, Beijing 100072, China
    不详
    Wuhan Ligong Daxue Xuebao, 2006, SUPPL. 1 (310-313):
  • [4] Research on the monitoring system of CNC grinding process based on acoustic emission
    Hu Zhongxiang
    Teng Jiaxu
    Yang Junwei
    Huo Xiaojing
    Shi Xiaojun
    1ST INTERNATIONAL SYMPOSIUM ON DIGITAL MANUFACTURE, VOLS 1-3, 2006, : 310 - 313
  • [5] A Study on Monitoring System for Grinding Wheel Status Based on Acoustic Emission Technology
    Li Peijiang
    You Ting
    ADVANCES IN MECHANICAL ENGINEERING, PTS 1-3, 2011, 52-54 : 2051 - +
  • [6] Grinding Wheel Wear Experiment Based on Acoustic Emission Monitoring
    Yin G.-Q.
    Wang D.
    Guan Y.-Y.
    Wang J.-H.
    Dongbei Daxue Xuebao/Journal of Northeastern University, 2022, 43 (08): : 1127 - 1133
  • [7] In-process grinding monitoring by acoustic emission
    Aguiar, PR
    Serni, PJA
    Bianchi, EC
    Dotto, FRL
    2004 IEEE INTERNATIONAL CONFERENCE ON ACOUSTICS, SPEECH, AND SIGNAL PROCESSING, VOL V, PROCEEDINGS: DESIGN AND IMPLEMENTATION OF SIGNAL PROCESSING SYSTEMS INDUSTRY TECHNOLOGY TRACKS MACHINE LEARNING FOR SIGNAL PROCESSING MULTIMEDIA SIGNAL PROCESSING SIGNAL PROCESSING FOR EDUCATION, 2004, : 405 - 408
  • [8] Monitoring of Grinding Process with Acoustic Emission Signals
    穆玉海
    杨青
    姚英学
    袁哲俊
    Journal of Harbin Institute of Technology, 1994, (02) : 48 - 51
  • [9] Diamond Grinding Wheel Condition Monitoring Based on Acoustic Emission Signals
    Bi, Guo
    Liu, Shan
    Su, Shibo
    Wang, Zhongxue
    SENSORS, 2021, 21 (04) : 1 - 17
  • [10] Grinding monitoring through thermal acoustic emission signatures
    Chen, Xun
    Mohamed, Arif
    Folkes, Janet
    ADVANCES IN ABRASIVE TECHNOLOGY XIV, 2011, 325 : 287 - +
12345