Microstructure of adiabatic shear bands induced during high speed machining of high-strength steel

被引：0
|
作者：
Duan, C. Z. [1 ]
Wang, M. J. [1 ]
Pang, J. Z. [1 ]
Cai, Y. J. [1 ]
机构：
[1] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian, Peoples R China
来源：
CURRENT DEVELOPMENT IN ABRASIVE TECHNOLOGY, PROCEEDINGS | 2006年
关键词：
adiabatic shear band; high speed machining; recrystallization;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Microstructures of adiabatic shear bands(ASB,) in the serrated chips induced during high speed orthogonal cutting test of 30CrNi(3)MoV high strength steel were observed by optical microscope, SEM and TEM. The observations show that there are two types of ASBs in the serrated chips, i.e. the deformed band and white shear band. The investigation results indicate that the deformed shear bands with elongated and broken microstructure is result from large plastic deformation, recrystallization is proposed to be the mechanism to explain the formation of the fine equiaxed grains observed in the center of white shear bands.
引用
收藏
页码：453 / +
页数：3
相关论文
共 50 条
  • [1] Microstructure and hardness of adiabatic shear bands formed during orthogonal cutting of high strength steel
    Duan, Chun-Zheng
    Wang, Min-Jie
    Cailiao Kexue yu Gongyi/Material Science and Technology, 2004, 12 (06): : 602 - 605
  • [2] A review of microstructural evolution in the adiabatic shear bands induced by high speed machining
    Chunzheng Duan
    Minjie Wang
    Acta Metallurgica Sinica (English Letters), 2013, 26 : 97 - 112
  • [3] A Review of Microstructural Evolution in the Adiabatic Shear Bands Induced by High Speed Machining
    Duan, Chunzheng
    Wang, Minjie
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2013, 26 (02) : 97 - 112
  • [4] A Review of Microstructural Evolution in the Adiabatic Shear Bands Induced by High Speed Machining
    Chunzheng DUAN
    Minjie WANG
    Acta Metallurgica Sinica(English Letters), 2013, 26 (02) : 97 - 112
  • [5] Effect of heat treatment on adiabatic shear bands in a high-strength low alloy steel
    Odeshi, AG
    Bassim, MN
    Al-Ameeri, S
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 419 (1-2): : 69 - 75
  • [6] Microstructural study of adiabatic shear bands formed in serrated chips during high-speed machining of hardened steel
    C. Z. Duan
    Y. J. Cai
    M. J. Wang
    G. H. Li
    Journal of Materials Science, 2009, 44 : 897 - 902
  • [7] Microstructural study of adiabatic shear bands formed in serrated chips during high-speed machining of hardened steel
    Duan, C. Z.
    Cai, Y. J.
    Wang, M. J.
    Li, G. H.
    JOURNAL OF MATERIALS SCIENCE, 2009, 44 (03) : 897 - 902
  • [8] 3D simulation of adiabatic shear bands in high speed machining
    Delalondre, Fabien
    Guerdoux, Simon
    Fourment, Lionel
    NUMIFORM '07: MATERIALS PROCESSING AND DESIGN: MODELING, SIMULATION AND APPLICATIONS, PTS I AND II, 2007, 908 : 1137 - +
  • [9] Study on microscopic characteristics of adiabatic shear bands in the serrated chips formed during high speed machining
    Duan, Chun-Zheng
    Wang, Min-Jie
    Li, Guo-He
    Cai, Yu-Jun
    Baozha Yu Chongji/Explosion and Shock Waves, 2007, 27 (01): : 91 - 96
  • [10] An Investigation into the Microstructure of Adiabatic Shear Banding in AISI 1045 Hardened Steel due to High Speed Machining
    Duan, C. Z.
    Zhang, L. C.
    Yu, H. Y.
    Wang, M. J.
    MATERIALS PROCESSING TECHNOLOGIES, PTS 1 AND 2, 2011, 154-155 : 321 - +
12345