Joining of ceramic to metal by friction welding process: A review

被引:9
|
作者
Ahmed, Shaik Abrar [1 ]
Hasanabadi, M. Fakouri [2 ]
Kumar, A. Varun [1 ]
机构
[1] BS Abdur Rahman Crescent Inst Sci & Technol, Dept Mech Engn, Chennai 600048, Tamil Nadu, India
[2] Iranian Res Org Sci & Technol IROST, Dept Adv Mat & Renewable Energies, Tehran, Iran
关键词
Ceramic; metal joining; friction welding; process parameter; mechanical properties;
D O I
10.1177/14644207211001080
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this paper, the recent progress in friction welding of alumina along with its various composites to metals is thoroughly investigated and compared. Among the existing methods of joining ceramics to metals, the friction welding process seems to be a reliable approach that provides promising joint properties. A relationship is established between processing parameters, their resultant microstructures, and their associated mechanical properties. The material properties and the environmental factors are taken into account while manifesting this comparison. The influence of various factors such as rotations per minute (r/min), friction pressure, and friction time on mechanical properties is critically analyzed. However, several challenges that must be addressed appropriately to achieve these joints and to fabricate the same have been discussed.
引用
收藏
页码:1723 / 1736
页数:14
相关论文
共 50 条
  • [1] Joining of metal matrix composites using friction stir welding: a review
    Parikh, V. K.
    Badgujar, A. D.
    Ghetiya, N. D.
    MATERIALS AND MANUFACTURING PROCESSES, 2019, 34 (02) : 123 - 146
  • [2] Novel joining process - friction stir welding
    Knipstrom, Karl-Erik
    Pekkari, Bertil
    Svetsaren, a Welding Review, 1997, 52 (1-2): : 49 - 52
  • [3] ADVANCED CERAMIC METAL JOINING PROCESS
    DELUCA, MA
    SWAIN, JW
    SWANK, LR
    AMERICAN CERAMIC SOCIETY BULLETIN, 1986, 65 (11): : 1475 - 1475
  • [4] Joining of metal to plastic using friction lap welding
    Liu, F. C.
    Liao, J.
    Nakata, K.
    MATERIALS & DESIGN, 2014, 54 : 236 - 244
  • [5] Joining of PEEK plates by friction stir welding process
    Jose, J. Vinodh
    Panneerselvam, K.
    MATERIALS TODAY-PROCEEDINGS, 2021, 39 : 1635 - 1639
  • [6] Friction stir welding: A solid state joining process
    Alberti, N
    Fratini, L
    AMST '05: ADVANCED MANUFACTURING SYSTEMS AND TECHNOLOGY, PROCEEDINGS, 2005, (486): : 67 - 86
  • [7] PRODUCTION OF METAL CERAMIC JOINTS BY FRICTION WELDING
    GRUNAUER, H
    HORN, H
    WEISS, H
    JOINING CERAMICS, GLASS AND METAL, 1989, : 185 - 190
  • [8] The Development of Adjustable Friction Stir Welding for Joining Metal to Resin
    Gao Y.
    Yamamoto N.
    Liao J.
    Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 2024, 90 (07): : 563 - 567
  • [9] Friction welding: An effective joining process for hybrid additive manufacturing
    Dwivedi, Mrinal
    Silvestri, Alessia Teresa
    Franchitti, Stefania
    Krishnaswamy, Hariharan
    Narayanaperumal, Arunachalam
    Astarita, Antonello
    CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2021, 35 : 460 - 473
  • [10] Recent development of new joining process, friction stir welding
    Shinoda, Takeshi
    Yosetsu Gakkai Shi/Journal of the Japan Welding Society, 1998, 67 (04):