Grain refinement and plastic formability of Mg-14Li-1Al alloy

被引：0
|
作者：
Jiang Bin [1 ,2 ]
Yin Heng-mei [2 ]
Li Rui-hong [1 ,2 ]
Gao Liang [1 ,2 ]
机构：
[1] Chongqing Univ, Natl Engn Res Ctr Magnesium Alloys, Chongqing 400030, Peoples R China
[2] Chongqing Univ, Coll Mat Sci & Engn, Chongqing 400030, Peoples R China
来源：
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2010年 / 20卷
基金：
中国国家自然科学基金;
关键词：
Mg-14Li-1Al alloy; sheet; grain refinement; plasticity formability; ALUMINUM; MICROSTRUCTURE;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Al-5Ti-1B master alloy was added into Mg-14Li-1Al (LA141) alloy and then LA141 sheets were prepared by extrusion and cold rolling. The effect of the addition level of Al-5Ti-1B master alloy on the grain size of LA141 alloy was investigated as well as the effects of the total reduction of cold rolling and the annealing temperature on microstructure, mechanical properties and plastic formability of the LA141 sheets. The results show that the optimal addition level of Al-5Ti-1B master alloy into LA141 alloy is 1.25% (mass fraction) and LA141 alloy has the finest grains. With the increase of the total reduction of cold rolling, the grains of the as-rolled LA141 sheets were flattened gradually. A proper anneal temperature of 200 degrees C is obtained for the cold rolled LA141 sheets. Under this condition, microstructure of the LA141 sheets consists of fine and uniform equiaxed grains and has higher Erichsen cupping index (IE).
引用
收藏
页码：S503 / S507
页数：5
相关论文
共 50 条
  • [1] Grain refinement and plastic formability of Mg-14Li-1Al alloy
    蒋斌
    殷恒梅
    李瑞红
    高亮
    Transactions of Nonferrous Metals Society of China, 2010, 20(S2) (S2) : 503 - 507
  • [2] Grain refinement and plastic formability of Mg-14Li-1%Al alloy
    Jiang B.
    Yin H.-M.
    Li R.-H.
    Gao L.
    Transactions of Nonferrous Metals Society of China (English Edition), 2010, 20 (SUPPL. 2): : s503 - s507
  • [3] Thermomechanical processing of an ultralight Mg-14Li-1Al alloy
    Islam, Rezawana
    Hadadzadeh, Amir
    Wells, Mary
    Haghshenas, Meysam
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 110 (11-12): : 3221 - 3239
  • [4] Thermomechanical processing of an ultralight Mg-14Li-1Al alloy
    Rezawana Islam
    Amir Hadadzadeh
    Mary Wells
    Meysam Haghshenas
    The International Journal of Advanced Manufacturing Technology, 2020, 110 : 3221 - 3239
  • [5] Microstructure and mechanical properties of friction stir welded ultralight Mg-14Li-1Al alloy
    Xu, Nan
    Qiu, Zhonghao
    Ren, Zike
    Wang, Dan
    Shen, Jun
    Song, Qining
    Zhao, Jianhua
    Bao, Yefeng
    MATERIALS CHARACTERIZATION, 2022, 194
  • [6] Effect of cryogenic rolling process on microstructure and mechanical properties of Mg-14Li-1Al alloy
    Liu, Hongyu
    Wang, Yang
    Li, Bingcheng
    Ma, Xiaochun
    Wu, Ruizhi
    Hou, Legan
    Zhang, Jinghuai
    Zhang, Milin
    MATERIALS CHARACTERIZATION, 2019, 157
  • [7] Grain refinement in an Al-Li-Mg-Sc alloy during intense plastic straining at 300°c
    Kaibyshev, R
    Saytaeva, K
    Musin, F
    Motohashi, Y
    HOT DEFORMATION OF ALUMINUM ALLOYS III, 2003, : 365 - 371
  • [8] Effect of Ca addition on grain refinement of Mg-9Li-1Al alloy
    Zeng, Ying
    Jiang, Bin
    Huang, Dehui
    Dai, Jiahong
    Pan, Fusheng
    JOURNAL OF MAGNESIUM AND ALLOYS, 2013, 1 (04) : 297 - 302
  • [9] A new approach to grain refinement of an Mg-Li-Al cast alloy
    Jiang, B.
    Qiu, D.
    Zhang, M. -X.
    Ding, P. D.
    Gao, L.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 492 (1-2) : 95 - 98
  • [10] Aging Behavior of YAl2p/Mg-14Li-1Al Composite
    Wu Guoqing
    Zhang Tao
    Sha Wei
    Wang Sujie
    Huang Zheng
    RARE METAL MATERIALS AND ENGINEERING, 2014, 43 (12) : 2958 - 2961
12345