Performance evaluation of premixed burner fueled with biomass derived producer gas

被引：24
|
作者：
Punnarapong, P. [1 ]
Sucharitakul, T. [1 ]
Tippayawong, N. [1 ]
机构：
[1] Chiang Mai Univ, Fac Engn, Dept Mech Engn, Chiang Mai 50200, Thailand
来源：
CASE STUDIES IN THERMAL ENGINEERING | 2017年 / 9卷
关键词：
Biomass conversion; Ceramic curing; Fuel Switching; Gas combustion; Renewable energy; OPEN CORE GASIFIER; GASIFICATION; GENERATION;
D O I：
10.1016/j.csite.2016.12.001
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
Energy consumption of liquefied petroleum gas (LPG) in ceramic firing process accounts for about 15-40% of production cost. Biomass derived producer gas may be used to replace LPG. In this work, a premixed burner originally designed for LPG was modified for producer gas. Its thermal performance in terms of axial and radial flame temperature distribution, thermal efficiency and emissions was investigated. The experiment was conducted at various gas production rates with equivalence ratios between 0.8 and 1.2. Flame temperatures of over 1200 degrees C can be achieved, with maximum value of 1260 degrees C. It was also shown that the burner can be operated at 30.5-39.4 kW(th) with thermal efficiency in the range of 84 - 91%. The maximum efficiency of this burner was obtained at producer gas flow rate of 24.3 Nm(3)/h and equivalence ratio of 0.84.
引用
收藏
页码：40 / 46
页数：7
相关论文
共 50 条
  • [1] Optimization of producer gas fired premixed burner
    Bhoi, P. R.
    Channiwala, S. A.
    RENEWABLE ENERGY, 2008, 33 (06) : 1209 - 1219
  • [2] Performance evaluation of producer gas burner for industrial application
    Panwar, N. L.
    Salvi, B. L.
    Reddy, V. Siva
    BIOMASS & BIOENERGY, 2011, 35 (03): : 1373 - 1377
  • [3] Development of a new premixed burner for biomass gasifier generated low calorific value producer gas for industrial applications
    Deore, Sujeetkumar P.
    Gadkari, Prabodh
    Mahajani, Sanjay M.
    Kumar, Sandeep
    Kumar, Sudarshan
    ENERGY, 2023, 279
  • [4] Simulation of Producer Gas Combustion in a Premixed Burner for Ceramic Firing Process
    Punnarapong, Phitsanupong
    Sucharitakul, Tawan
    Tippayawong, Nakorn
    2017 INTERNATIONAL CONFERENCE ON ALTERNATIVE ENERGY IN DEVELOPING COUNTRIES AND EMERGING ECONOMIES, 2017, 138 : 622 - 627
  • [5] Emission characteristics and axial flame temperature distribution of producer gas fired premixed burner
    Bhoi, P. R.
    Channiwala, S. A.
    BIOMASS & BIOENERGY, 2009, 33 (03): : 469 - 477
  • [6] Performance investigation of a modified small engine fueled with producer gas
    Homdoung, Nigran
    Tippayawong, Nakorn
    Dussadee, Natthawud
    MAEJO INTERNATIONAL JOURNAL OF SCIENCE AND TECHNOLOGY, 2015, 9 (01) : 10 - 20
  • [7] Modeling fuel NOx formation from combustion of biomass-derived producer gas in a large-scale burner
    Sukumaran, Sujith
    Kong, Song-Charng
    COMBUSTION AND FLAME, 2013, 160 (10) : 2159 - 2168
  • [8] Catalytic destruction of tar in biomass derived producer gas
    Zhang, RQ
    Brown, RC
    Suby, A
    Cummer, K
    ENERGY CONVERSION AND MANAGEMENT, 2004, 45 (7-8) : 995 - 1014
  • [9] Performance simulation and optimization of SI engine fueled with peach biomass-based producer gas and propane blend
    Raj, Reetu
    Singh, Deepak Kumar
    Tirkey, Jeewan Vachan
    THERMAL SCIENCE AND ENGINEERING PROGRESS, 2023, 41
  • [10] Computational Fluid Dynamics for Biomass Producer Gas Burner Development to be used in a Cremation Process
    Achawangkul, Y.
    Maruyama, N.
    Hirota, M.
    Chaichana, C.
    Teeratitayangkul, P.
    PROCEEDINGS OF THE 2014 INTERNATIONAL CONFERENCE & UTILITY EXHIBITION ON GREEN ENERGY FOR SUSTAINABLE DEVELOPMENT (ICUE), 2014,
12345