Carbon composites based on multiaxial multiply stitched preforms. Part 2. KES-F characterisation of the deformability of the preforms at low loads

被引：74
|
作者：
Lomov, SV [1 ]
Verpoest, I [1 ]
Barburski, M [1 ]
Laperre, J [1 ]
机构：
[1] Katholieke Univ Leuven, Dept Met & Mat Engn, B-3001 Louvain, Belgium
来源：
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2003年 / 34卷 / 04期
关键词：
fabrics/textiles; mechanical properties; mechanical testing; forming;
D O I：
10.1016/S1359-835X(03)00025-3
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Deformability of multiaxial multiply stitched carbon preforms is studied at low loads using the Kawabata evaluation system. Results of the test in tension, shear, compression, bending and friction are reported. Both bi- and quadriaxial fabrics demonstrated a fairly uniform behaviour. The general features of deformability are formulated and generic values of parameters for evaluation purposes are proposed. (C) 2003 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码：359 / 370
页数：12
相关论文
共 7 条
  • [1] Carbon composites based on multiaxial multiply stitched preforms. Part 1. Geometry of the preform
    Lomov, SV
    Belov, EB
    Bischoff, T
    Ghosh, SB
    Chi, TT
    Verpoest, I
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2002, 33 (09) : 1171 - 1183
  • [2] Carbon composites based on multiaxial multiply stitched preforms. Part 3: Biaxial tension, picture frame and compression tests of the preforms
    Lomov, SV
    Barburski, M
    Stoilova, T
    Verpoest, I
    Akkerman, R
    Loendersloot, R
    ten Thije, RHW
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2005, 36 (09) : 1188 - 1206
  • [3] Carbon composites based on multiaxial multiply stitched preforms. Part V: geometry of sheared biaxial fabrics
    Loendersloot, R
    Lomov, SV
    Akkerman, R
    Verpoest, I
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2006, 37 (01) : 103 - 113
  • [4] Carbon composites based on multi-axial multi-ply stitched preforms. Part 4. Mechanical properties of composites and damage observation
    Truong, TC
    Vettori, M
    Lomov, S
    Verpoest, I
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2005, 36 (09) : 1207 - 1221
  • [5] Carbon composites based on multi-axial multi-ply stitched preforms. Part 7: Mechanical properties and damage observations in composites with sheared reinforcement
    Truong, T. C.
    Ivanov, D. S.
    Klimshin, D. V.
    Lomov, S. V.
    Verpoest, I.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2008, 39 (09) : 1380 - 1393
  • [6] Carbon composites based on multi-axial multi-ply stitched preforms - Part 6. Fatigue behaviour at low loads: Stiffness degradation and damage development
    Vallons, Katleen
    Zong, Mengmeng
    Lomov, V.
    Verpoest, Ignaas
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2007, 38 (07) : 1633 - 1645
  • [7] Mechanical performance of carbon fibre-reinforced composites based on preforms stitched with innovative low-melting temperature and matrix soluble thermoplastic yarns
    Beier, Uwe
    Wolff-Fabris, Felipe
    Fischer, Frank
    Sandler, Jan K. W.
    Altstaedt, Volker
    Huelder, Gerrit
    Schmachtenberg, Ernst
    Spanner, Hermann
    Weimer, Christian
    Roser, Tim
    Buchs, Wolfgang
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2008, 39 (09) : 1572 - 1581
1