Effect of Minimum Quantity Cooling Lubrication (MQCL) on Chip Morphology and Surface Roughness in Turning Low Carbon Steels

被引：6
|
作者：
Maruda, W. Radoslaw [1 ]
Legutko, Stanislaw [1 ]
Krolczyk, Grzegorz [1 ]
机构：
[1] Univ Zielona Gora, Fac Mech Engn, PL-65516 Zielona Gora, Poland
来源：
ENGINEERING SOLUTIONS AND TECHNOLOGIES IN MANUFACTURING | 2014年 / 657卷
关键词：
dry cutting; near dry cutting per; chip shaping; surface roughness; Minimum Quantity Cooling Lubrication; DUPLEX STAINLESS-STEEL; MQL; FLUIDS;
D O I：
10.4028/www.scientific.net/AMM.657.38
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The paper presents the results of research on the effect produced by modern cooling methods on the chip shapes and surface roughness when finish turning of ASTM A53 and AISI 1010 low carbon steels. Dry cutting, cooling by compressed air and the Minimum-Quantity-Cooling-Lubrication (MQCL) method were compared. The MQCL method is more effective for machining low carbon steel and ensures a usable chip shape and lesser surface roughness. Depending on the cutting conditions, the efficiency of the MQCL method is 10 to 30 % higher compared to dry machining. Examples of experimental investigations about reducing the use of cooling lubricant substances in turning process can be found in the open literature.
引用
收藏
页码：38 / 42
页数：5
相关论文
共 50 条
  • [1] Influence of Minimum Quantity Cooling Lubrication (MQCL) on Chip Formation Zone Factors and Shearing Force in Turning AISI 1045 Steel
    Maruda, Radoslaw
    Legutko, Stanislaw
    Krolczyk, Grzegorz
    ENGINEERING SOLUTIONS AND TECHNOLOGIES IN MANUFACTURING, 2014, 657 : 43 - +
  • [2] Investigation of surface roughness and chip morphology of aluminum alloy in dry and minimum quantity lubrication machining
    Cagan, Suleyman Cinar
    Venkatesh, Bellam
    Buldum, Berat Baris
    MATERIALS TODAY-PROCEEDINGS, 2020, 27 : 1122 - 1126
  • [3] The Influence of Spray Characteristics on Surface Roughness in Minimum Quantity Lubrication Turning
    Zhang, Chunyan
    Wang, Guicheng
    Pei, Hongjie
    Shen, Chungen
    MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5, 2010, 97-101 : 1906 - 1909
  • [4] Tool wear, surface roughness, electric current, and chip morphology in the turning of AISI 1045 steel with minimum quantity lubrication (MQL) technique
    de Oliveira, Patrick Abreu
    Pereira, Luana Mychelly Pinto de Menezes
    Moncao, Renan Matos
    de Paiva, Raphael Lima
    Barbosa, Marcos Guilherme Carvalho Braulio
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 133 (11-12): : 5743 - 5759
  • [5] Tool wear, surface roughness, electric current, and chip morphology in the turning of AISI 1045 steel with minimum quantity lubrication (MQL) technique
    de Oliveira, Patrick Abreu
    de Menezes Pereira, Luana Mychelly Pinto
    Monção, Renan Matos
    de Paiva, Raphael Lima
    Barbosa, Marcos Guilherme Carvalho Braulio
    International Journal of Advanced Manufacturing Technology, 1600, 133 (11-12): : 5743 - 5759
  • [6] Effect of cutting parameters on tool wear under minimum quantity cooling lubrication (MQCL) conditions
    Niancong Liu
    Chengli Zheng
    Daiyang Xiang
    Hao Huang
    Jin Wang
    The International Journal of Advanced Manufacturing Technology, 2019, 105 : 515 - 529
  • [7] Effect of cutting parameters on tool wear under minimum quantity cooling lubrication (MQCL) conditions
    Liu, Niancong
    Zheng, Chengli
    Xiang, Daiyang
    Huang, Hao
    Wang, Jin
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 105 (1-4): : 515 - 529
  • [8] RESEARCH ON EMULSION MIST GENERATION IN THE CONDITIONS OF MINIMUM QUANTITY COOLING LUBRICATION (MQCL)
    Maruda, Radoslaw W.
    Feldshtein, Eugene
    Legutko, Stanislaw
    Krolczyk, Grzegorz M.
    TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2015, 22 (05): : 1213 - 1218
  • [9] A study on droplets sizes, their distribution and heat exchange for minimum quantity cooling lubrication (MQCL)
    Maruda, Radoslaw W.
    Krolczyk, Grzegorz M.
    Feldshtein, Eugene
    Pusavec, Franci
    Szydlowski, Michal
    Legutko, Stanislaw
    Sobczak-Kupiec, Agnieszka
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2016, 100 : 81 - 92
  • [10] A comparative analysis of chip shape, residual stresses, and surface roughness in minimum-quantity-lubrication turning with various flow rates
    Sadeghifar, Morteza
    Javidikia, Mahshad
    Songmene, Victor
    Jahazi, Mohammad
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 121 (5-6): : 3977 - 3987
12345