Removal of arsenic(III) from aqueous media using amine functionalized-grafted styrene/maleic anhydride low-density polyethylene films

被引:8
|
作者
Reza, A. F. G. Masud [1 ]
Kormoker, Tapos [2 ]
Idris, Abubakr M. [3 ,4 ]
Shamsuzzoha, Md. [2 ]
Islam, Md. Saiful [5 ,7 ]
El-Zahhar, Adel A. [3 ,4 ,6 ]
Islam, Md. Saiful [5 ,7 ]
机构
[1] Natl Univ, Nat Sci Grp, Dept Chem, Gazipur, Bangladesh
[2] Patuakhali Sci & Technol Univ, Dept Emergency Management, Patuakhali, Bangladesh
[3] King Khalid Univ, Res Ctr Adv Mat Sci RCAMS, Abha, Saudi Arabia
[4] King Khalid Univ, Coll Sci, Dept Chem, Abha, Saudi Arabia
[5] Sina Pharmaceut Ind Ltd, IBN, Dhaka, Bangladesh
[6] AEA, Nucl Chem Dept, Hot Lab Ctr, Cairo, Egypt
[7] Patuakhali Sci & Technol Univ, Dept Soil Sci, Patuakhali, Bangladesh
关键词
Arsenic; removal; polyethylene; radiation; grafted films; heavy metals; WATER; RADIATION; ADSORBENTS; TECHNOLOGIES; CHROMIUM;
D O I
10.1080/15569543.2021.1922921
中图分类号
R99 [毒物学(毒理学)];
学科分类号
100405 ;
摘要
This study demonstrates the development of effective modified films for As(III) removal from aqueous solution. Low-density polyethylene (LDPE) films were grafted by c (Sty/MAn) co-monomer using gamma irradiation. The grafted films were functionalized by six amine groups including semicarbazide, L-aspartic acid, 2-aminopyridine, thiosemicarbazide, hydroxylamine-HCl, and thiourea. The grafting was verified using FTIR that shows MAn carbonyl groups at 1860 and 1785 cm(-1). The semicarbazide and L-aspartic acid functionalized films showed 100% and 75% removal efficiency, respectively, following the conditions of pH 7, 50 mu g/mL As(III), 50 min contact time, and room temperature. The As(III) loaded chelating films treated with semicarbazide and L-aspartic acid were regenerated by contacting the films with 0.2 mol/L HCl solution for 90 min. The results show 100% release of the adsorbed As(III). The FTIR analysis of the regenerated films showed no change in the characteristic peaks, indicating the stability of film functionality in 0.2 mol/L HCl for 90 min. Additionally, the removal of As(III) using the regenerated films treated with semicarbazide or L-aspartic showed unaffected removal percentage up to eight adsorption-desorption regeneration cycles.
引用
收藏
页码:713 / 720
页数:8
相关论文
共 43 条
  • [1] Maleic Anhydride-Grafted Linear Low-Density Polyethylene With Low Gel Content
    Huang, Le-Ping
    Zhou, Xing-Ping
    Cui, We
    Xie, Xiao-Lin
    Tong, Shen-Yi
    POLYMER ENGINEERING AND SCIENCE, 2009, 49 (04): : 673 - 679
  • [2] Properties of Bloodmeal/Linear Low-density Polyethylene Blends Compatibilized with Maleic Anhydride Grafted Polyethylene
    Marsilla, K. I. Ku
    Verbeek, C. J. R.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2013, 130 (03) : 1890 - 1897
  • [3] Antibacterial Activity of Low-Density Polyethylene and Low-Density Polyethylene-co-maleic Anhydride Films Incorporated with ZnO Nanoparticles
    de Souza, Roberta Cristina
    de Moraes, Jaqueline Oliveira
    Haberbeck, Leticia Ungaretti
    Hermes de Araujo, Pedro Henrique
    Baggio Ribeiro, Deise Helena
    Mattar Carciofi, Bruno Augusto
    FOOD AND BIOPROCESS TECHNOLOGY, 2021, 14 (10) : 1872 - 1884
  • [4] Antibacterial Activity of Low-Density Polyethylene and Low-Density Polyethylene-co-maleic Anhydride Films Incorporated with ZnO Nanoparticles
    Roberta Cristina de Souza
    Jaqueline Oliveira de Moraes
    Leticia Ungaretti Haberbeck
    Pedro Henrique Hermes de Araújo
    Deise Helena Baggio Ribeiro
    Bruno Augusto Mattar Carciofi
    Food and Bioprocess Technology, 2021, 14 : 1872 - 1884
  • [5] Effects of screw configurations on the grafting of maleic anhydride grafted low-density polyethylene in reactive extrusion
    Fang, Hui
    Ma, Xiuqing
    Feng, Lianxun
    Wang, Kuisheng
    Cao, Bin
    JOURNAL OF APPLIED POLYMER SCIENCE, 2008, 108 (06) : 3652 - 3661
  • [6] Mechanical properties and thermal stability of low-density polyethylene grafted maleic anhydride/montmorillonite nanocomposites
    Chang, Ming-Kuen
    JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY, 2015, 27 : 96 - 101
  • [7] Effects of screw configurations on the grafting of maleic anhydride grafted low-density polyethylene in reactive extrusion
    Fang, Hui
    Ma, Xiuqing
    Feng, Lianxun
    Wang, Kuisheng
    Cao, Bin
    Journal of Applied Polymer Science, 2008, 108 (06): : 3652 - 3661
  • [8] Properties of Chicken Feather Fiber-Filled Low-Density Polyethylene Composites: The Effect of Polyethylene Grafted Maleic Anhydride
    Ghani, Supri A.
    Tan, Soo Jin
    Yeng, Teh Soo
    POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2013, 52 (05) : 495 - 500
  • [9] Environmental weathering of (linear low-density polyethylene)/(soya powder) blends compatibilized with polyethylene-grafted maleic anhydride
    Ting, Sam Sung
    Ismail, Hanafi
    Ahmad, Zulkifli
    JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, 2012, 18 (01): : 57 - 64
  • [10] Investigation of the morphology and properties of the polypropylene/low-density polyethylene/wood powder and the maleic anhydride grafted polypropylene/low-density polyethylene/wood powder polymer blend composites
    Dikobe, D. G.
    Luyt, A. S.
    JOURNAL OF COMPOSITE MATERIALS, 2017, 51 (14) : 2045 - 2059