Interface microstructure of diffusion bonded austenitic stainless steel and medium carbon steel couple

被引：11

作者：

Kurt, B. ^{[1
]}

Orhan, N. ^{[1
]}

Ozel, S. ^{[1
]}

机构：

[1] Firat Univ, Tech Educ Fac, Dept Met, TR-23119 Elazig, Turkey

来源：

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING | 2007年 / 12卷 / 03期

关键词：

austenitic stainless steel; medium carbon steel; diffusion bonding; interface microstructure;

D O I：

10.1179/174329307X175164

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In the present study, an austenitic stainless steel and medium carbon steel were diffusion bonded. The effect of bonding temperature on microstructural changes and shear strength across the joint region was investigated by optical and scanning electron microscopy, energy dispersive spectroscopy and microhardness measurements. The results showed that the best joint free from microcrack and micovoids was obtained at 900 degrees C with maximum shear strength of 475 MPa.

引用

页码：197 / 201

页数：5

共 50 条

[1] Interface structure of diffusion bonded duplex stainless steel and medium carbon steel couple
Kurt, Bulent
Calik, Adnan
MATERIALS CHARACTERIZATION, 2009, 60 (09) : 1035 - 1040
[2] The interface morphology of diffusion bonded dissimilar stainless steel and medium carbon steel couples
Kurt, Bulent
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 190 (1-3) : 138 - 141
[3] Microstructure of Austenitic Stainless Steel Explosively Bonded to Low Carbon-Steel
Yamashita, Tadayoshi
Microscopy, 1973, 22 (01) : 13 - 18
[4] Micromechanisms of fatigue fracture at diffusion bonded interface of austenitic stainless steel
Institute of Process Equipment, East China University of Science and Technology, Shanghai 200237, China
Cailiao Yanjiu Xuebao, 2007, SUPPL. (152-155):
[5] MICROSTRUCTURE OF AUSTENITIC STAINLESS-STEEL EXPLOSIVELY BONDED TO LOW CARBON-STEEL
YAMASHIT.T
JOURNAL OF ELECTRON MICROSCOPY, 1973, 22 (01): : 13 - 18
[6] Interface microstructure of diffusion bonded Ni3Al intermetallic alloy and austenitic stainless steel
Calik, Adnan
MATERIALS LETTERS, 2009, 63 (28) : 2462 - 2465
[7] Interfacial Microstructure of Diffusion Bonded Inconel 738 and Ferritic Stainless Steel Couple
Bulent Kurt
Mustafa Ulutan
Journal of Materials Science & Technology, 2009, 25 (04) : 527 - 530
[8] Interfacial Microstructure of Diffusion Bonded Inconel 738 and Ferritic Stainless Steel Couple
Kurt, Bulent
Ulutan, Mustafa
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2009, 25 (04) : 527 - 530
[9] Interface characterisation of diffusion bonded Ti-6Al-4V alloy and austenitic stainless steel couple
Kurt, B.
Orhan, N.
Kaya, M.
MATERIALS SCIENCE AND TECHNOLOGY, 2009, 25 (04) : 556 - 560
[10] Interface microstructure in ferritic/austenitic stainless steel bicrystals
Taisne, A
Decamps, B
Priester, L
APPLIED CRYSTALLOGRAPHY, 2001, : 275 - 280

← 1 2 3 4 5 →