In-situ tribochemical formation of self-lubricating diamond-like carbon films

被引：75

作者：

Argibay, N. ^{[1
]}

Babuska, T. F. ^{[1
]}

Curry, J. F. ^{[1
]}

Dugger, M. T. ^{[1
]}

Lu, P. ^{[1
]}

Adams, D. P. ^{[1
]}

Nation, B. L. ^{[1
]}

Doyle, B. L. ^{[1
]}

Pham, M. ^{[1
]}

Pimentel, A. ^{[1
]}

Mowry, C. ^{[1
]}

Hinkle, A. R. ^{[1
]}

Chandross, M. ^{[1
]}

机构：

[1] Sandia Natl Labs, Mat Phys & Chem Sci Ctr, POB 5800, Albuquerque, NM 87185 USA

来源：

CARBON | 2018年 / 138卷

关键词：

DLC; Diamond-like carbon; Hydrocarbons; In situ; Low friction; Tribochemistry; AMORPHOUS-CARBON; CATALYSTS; FRICTION; REDUCTION; OXIDATION; WEAR; MECHANISM; CONTACTS; COATINGS; GROWTH;

D O I：

10.1016/j.carbon.2018.06.006

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

Diamond-like carbon (DLC) films were tribochemically formed from ambient hydrocarbons on the surface of a highly stable nanocrystalline Pt-Au alloy. A sliding contact between an alumina sphere and Pt-Au coated steel exhibited friction coefficients as low as mu = 0.01 after dry sliding in environments containing trace (ppb) organics. Ex situ analysis indicated that the change in friction coefficient was due to the formation of amorphous carbon films, and Raman spectroscopy and elastic recoil analysis showed that these films consist of sp(2)/sp(3) amorphous carbon with as much as 20% hydrogen. Transmission electron microscopy indicated these films had thicknesses exceeding 100 nm, and were enhanced by the incorporation of worn Pt-Au nanoparticles. The result was highly wear-resistant, low-friction DLC/Pt-Au nanocomposites. Atomistic simulations of hydrocarbons under shear between rigid Pt slabs using a reactive force field showed stress-induced changes in bonding through chain scission, a likely route towards the formation of these coatings. This novel demonstration of in situ tribochemical formation of self-lubricating films has significant impact potential in a wide range of engineering applications. (C) 2018 The Authors. Published by Elsevier Ltd.

引用

页码：61 / 68

页数：8

共 50 条

[1] In-situ formation of self-lubricating tribo-films for dry machinability
Sumitomo, T
Aizawa, T
Yamamoto, S
SURFACE & COATINGS TECHNOLOGY, 2005, 200 (5-6): : 1797 - 1803
[2] In situ analysis of the tribochemical reactions of diamond-like carbon by internal reflection spectroscopy
Olsen, JE
Fischer, TE
Gallois, B
WEAR, 1996, 200 (1-2) : 233 - 237
[3] Interfacial tribochemical kinetics: A new perspective on superlubricity of diamond-like carbon films
Chen, Weiqi
Ma, TianBao
SCIENCE CHINA-TECHNOLOGICAL SCIENCES, 2024, 67 (07) : 2050 - 2052
[4] Interfacial tribochemical kinetics: A new perspective on superlubricity of diamond-like carbon films
CHEN WeiQi
MA Tian-Bao
Science China(Technological Sciences), 2024, 67 (07) : 2050 - 2052
[5] Modeling the tribochemical aspects of friction and gradual wear of diamond-like carbon films
Borodich, Feodor M.
Korach, Chad S.
Keer, Leon M.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 2007, 74 (01): : 23 - 30
[6] Interfacial tribochemical kinetics: A new perspective on superlubricity of diamond-like carbon films
CHEN WeiQi
MA Tian-Bao
Science China(Technological Sciences), 2024, (07) : 2050 - 2052
[7] In situ measurement of stresses in diamond-like carbon films
Delplancke-Ogletree, MP
Monteiro, OR
DIAMOND AND RELATED MATERIALS, 2003, 12 (12) : 2119 - 2127
[8] Diamond and diamond-like carbon films
Universitat de Barcelona, Catalunya, Spain
Vacuum, 1-2 (133-139):
[9] Diamond and diamond-like carbon films
Esteve, J
Polo, MC
Sánchez, G
VACUUM, 1999, 52 (1-2) : 133 - 139
[10] Formation of conducting nanochannels in diamond-like carbon films
Evtukh, A.
Litovchenko, V.
Semenenko, M.
Yilmazoglu, O.
Mutamba, K.
Hartnagel, H. L.
Pavlidis, D.
SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 2006, 21 (09) : 1326 - 1330

← 1 2 3 4 5 →