Five-axis HSM Tool-Path Planning of Integral Impeller

被引：0
|
作者：
Zhao, C. [1 ]
Guo, Y. Y. [2 ]
Bu, G. B. [3 ]
机构：
[1] Heilongjiang Coll Sci & Technol, Coll Mech Engn, Harbin 150027, Peoples R China
[2] Heilongjiang coll Sci & Technol, Cent Engn Training & Basic Experimentat, Harbin 150027, Peoples R China
[3] Nanjing Univ Aeronaut & Astronaut, Coll Mech & Elect Engn, Nanjing 210016, Peoples R China
来源：
FUNCTIONAL MANUFACTURING TECHNOLOGIES AND CEEUSRO I | 2010年 / 426-427卷
关键词：
impeller; tool-path planning; collision-free; linear interpolation;
D O I：
10.4028/www.scientific.net/KEM.426-427.572
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
There are two key problems in the manufacture process of impeller with HSM(High Speed Machining). One is the collision between tool and blade, the other is gnawed-cutting arisen by non-uniform change of the cutter axis. The control algorithm of collision-free cutter-axis was described and applied in this paper. The cutter-axis vector was optimized by quaternary linear interpolation method to make normal vector of blade changing continuous, so. These methods were synthetically used in the manufacture experiment. And the qualified impeller was produced. It indicated that the tool vector control method was feasible.
引用
收藏
页码：572 / +
页数：2
相关论文
共 50 条
  • [1] Accurate Trajectory Control for Five-Axis Tool-Path Planning
    Lin, Rong-Shine
    Ye, Cheng-Bing
    INTERNATIONAL MULTICONFERENCE OF ENGINEERS AND COMPUTER SCIENTIST, IMECS 2012, VOL II, 2012, : 932 - 937
  • [2] Tool-path planning method for kinematics optimization of blade machining on five-axis machine tool
    Lu, Zhongyang
    Yang, Xu
    Zhao, Ji
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 121 (1-2): : 1253 - 1267
  • [3] Tool path planning for five-axis U-pass milling of an impeller
    Jingyang Feng
    Zhaocheng Wei
    Minjie Wang
    Xueqin Wang
    Minglong Guo
    The International Journal of Advanced Manufacturing Technology, 2021, 117 : 3379 - 3391
  • [4] Tool path planning for five-axis U-pass milling of an impeller
    Feng, Jingyang
    Wei, Zhaocheng
    Wang, Minjie
    Wang, Xueqin
    Guo, Minglong
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 117 (11-12): : 3379 - 3391
  • [5] Tool-path planning method for kinematics optimization of blade machining on five-axis machine tool
    Zhongyang Lu
    Xu Yang
    Ji Zhao
    The International Journal of Advanced Manufacturing Technology, 2022, 121 : 1253 - 1267
  • [6] Tool-path verification in five-axis machining of sculptured surfaces
    Chun-Fong You
    Chih-Hsing Chu
    The International Journal of Advanced Manufacturing Technology, 1997, 13 : 248 - 255
  • [7] Tool-path verification in five-axis machining of sculptured surfaces
    Natl Taiwan Univ, Taipei, Taiwan
    Int J Adv Manuf Technol, 4 (248-255):
  • [8] Tool Path Planning and machining experiment for a centrifugal impeller based on five-axis machine tool
    Zhao, Yuxia
    Di, Jiejian
    Gao, Dewen
    MECHATRONICS AND INTELLIGENT MATERIALS, PTS 1 AND 2, 2011, 211-212 : 629 - 633
  • [9] A tool-path control scheme for five-axis machine tools
    Lo, CC
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2002, 42 (01): : 79 - 88
  • [10] Tool-path verification in five-axis machining of sculptured surfaces
    You, CF
    Chu, CH
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 1997, 13 (04): : 248 - 255
12345