Shear-driven flow in a toroid of square cross section

The two-dimensional wall-driven flow in a plane rectangular enclosure and the three-dimensional wall-driven flow in a parallelepiped of infinite length are limiting cases of the more general shear-driven flow that can be realized experimentally and modeled numerically in a toroid of rectangular cross section. Present visualization observations and numerical calculations of the shear-driven flow in a toroid of square cross section of characteristic side length D and radius of curvature R-c reveal many of the features displayed by sheared fluids in plane enclosures and in parallelepipeds of infinite as well as finite length. These include: the recirculating core flow and its associated counterrotating corner eddies; above a critical value of the Reynolds (or corresponding Goertler) number the appearance of Goertler vortices aligned with the recirculating core flow; at higher values of the Reynolds number flow unsteadiness, and vortex meandering as precursors to more disorganized forms of motion and eventual transition to turbulence. Present calculations also show that, for any fixed location in a toroid, the Goertler yortex passing through that location can alternate its sense of rotation periodically as a function of time, and that this alternation in sign of rotation occurs simultaneously for all the vortices in a toroid. This phenomenon has not been previously reported and, apparently, has not been observed for the wall-driven flow in a finite-length parallelepiped where the sense of rotation of the Goertler vortices is determined and stabilized by the end wall vortices. Unlike the wall-driven flow in a finite-length parallelepiped, the shear-driven flow in a toroid is devoid of contaminating end wall effects. For this reason, and because the toroid geometry allows a continuous variation of the curvature parameter delta =D/R-c, this flow configuration represents a more general paradigm for fluid mechanics research.