Carbon-addition-induced bulk ZrTiCuNiBe amorphous matrix composite containing ZrC particles

被引：27
|
作者：
Wang, WH
Bai, HY
机构：
[1] Chinese Acad Sci, Inst Phys, Beijing 100080, Peoples R China
[2] Chinese Acad Sci, Cryogen Lab, Beijing 100080, Peoples R China
来源：
MATERIALS LETTERS | 2000年 / 44卷 / 01期
基金：
中国国家自然科学基金;
关键词：
Zr41Ti14Cu12.5Ni10Be22.5 carbon alloy; amorphous matrix composite; hardness;
D O I：
10.1016/S0167-577X(99)00284-0
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Bulk Zr41Ti14Cu12.5Ni10Be22.5 amorphous matrix composites (AMCs) were synthesized by solid-liquid phase reaction between added carbon and constituents of the molten Zr-Ti-Cu-Ni-Be glass-forming alloy. The structure, thermal and mechanical properties were investigated by means of X-ray diffraction (XRD), differential scanning calorimetrically and microhardness measurements. It was found that the reaction-induced crystalline ZrC particles are uniformly distributed in the amorphous matrix. The thermal properties and glass-forming ability (GFA) of the amorphous matrix are not significantly changed up to 4% carbon addition, while the strength of the composite is significantly improved. The strengthening mechanism in the bulk AMC is discussed. (C) 2000 Elsevier Science B.V. All rights reserved.
引用
收藏
页码：59 / 63
页数：5
相关论文
共 50 条
  • [1] Electrodeposition of Ni matrix composite coatings containing ZrC particles
    Zhang, Z.
    Wu, X.
    Jiang, C.
    Ma, N.
    SURFACE ENGINEERING, 2014, 30 (01) : 21 - 25
  • [2] Refraction of Hydrosols Containing Diamond/Amorphous Carbon Composite Particles
    Vezo, O. S.
    Voitylov, A. V.
    Vojtylov, V. V.
    Petrov, M. P.
    Trusov, A. A.
    COLLOID JOURNAL, 2024, 86 (02) : 169 - 177
  • [3] Synthesis and mechanical properties of bulk amorphous Zr-Al-Ni-Cu alloys containing ZrC particles
    Kato, H
    Inoue, A
    MATERIALS TRANSACTIONS JIM, 1997, 38 (09): : 793 - 800
  • [4] Interfacial characteristics and mechanical properties of W fiber reinforced ZrTiCuNiBe amorphous matrix composite
    Chunsheng, Chen
    Jinshan, Li
    Weifeng, Ma
    Hongchao, Kou
    Rui, Hu
    Lian, Zhou
    Hengzhi, Fu
    RARE METAL MATERIALS AND ENGINEERING, 2007, 36 (08) : 1390 - 1393
  • [5] Formation of Carbon-Carbon Composite Materials with Nanoglobular Carbon Particles Embedded in Amorphous Carbon Matrix
    Anikeeva, I., V
    Arbuzov, A. B.
    Trenikhin, M., V
    Kryazhev, Yu G.
    21ST CENTURY: CHEMISTRY TO LIFE, 2019, 2143
  • [6] Synthesis and mechanical properties of in situ ZrC reinforced bulk Zr amorphous matrix composites
    Wu, XF
    Zhang, HF
    Qiu, KQ
    Yang, HC
    Hu, ZQ
    ACTA METALLURGICA SINICA, 2003, 39 (05) : 555 - 560
  • [7] Preparation of ZrC nano-particles reinforced amorphous carbon composite coating by atmospheric pressure chemical vapor deposition
    Sun, W.
    Xiong, X.
    Huang, B. Y.
    Li, G. D.
    Zhang, H. B.
    Xiao, P.
    Chen, Z. K.
    Zheng, X. L.
    APPLIED SURFACE SCIENCE, 2009, 255 (16) : 7142 - 7146
  • [8] Deformation behavior of strip-cast bulk amorphous matrix composites containing various crystalline particles
    Lee, Jung G.
    Kim, Hyoung Seop
    Lee, Sunghak
    Kim, Nack J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 449 : 176 - 180
  • [9] Effect of addition of ZrC particles on grain refining of low carbon steel during deformation induced ferrite transformation
    Kuang, Jian-Xin
    Tang, Ming-Hua
    Liu, Zhi-Yi
    Deng, Bin
    Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2011, 32 (04): : 70 - 75
  • [10] Deformation-induced nanocrystallization and its influence on work hardening in a bulk amorphous matrix composite
    Lee, JC
    Kim, YC
    Ahn, JP
    Kim, HS
    Lee, SH
    Lee, BJ
    ACTA MATERIALIA, 2004, 52 (06) : 1525 - 1533
12345