Impact of biaxial square woven jute fabric reinforcement on mechanical performance of polyester-based composites

被引：0
|
作者：
Sezgin, Hande [1 ]
Enis, Ipek Yalcin [1 ]
Berkalp, Omer Berk [1 ]
机构：
[1] Istanbul Tech Univ, Text Technol & Design Fac, Text Engn Dept, Inonu St 65, TR-34437 Istanbul, Turkey
来源：
INDIAN JOURNAL OF FIBRE & TEXTILE RESEARCH | 2018年 / 43卷 / 02期
关键词：
Biaxial woven fabric; Composite; Compression molding; Jute fibre; Mechanical testing; Polyester; woven fabric; HYBRID COMPOSITES; TENSILE;
D O I：
暂无
中图分类号：
TB3 [工程材料学]; TS1 [纺织工业、染整工业];
学科分类号：
0805 ; 080502 ; 0821 ;
摘要：
In this study, 4, 6 and 8 plied biaxial square woven jute fabric reinforced polyester composites have been fabricated by the compression molding technique. The physical properties (void fraction, fibre/volume and fibre/weight ratios) and mechanical properties (tensile, flexural and impact strength) of the composites are investigated. According to the physical evaluation test results, the highest void content is calculated for 8 plied composites (11%), where the fibre volume ratio (41.7%) and weight ratio (46.4%) are also maximum. The mechanical test results show that with the increase in jute fabric plies from four to eight, tensile strength, flexural stress and impact resistance improve by 25%, 100% and 340% respectively.
引用
收藏
页码：252 / 256
页数：5
相关论文
共 50 条
  • [1] Impact of biaxial square woven jute fabric reinforcement on mechanical performance of polyester-based composites
    Enis, Ipek Yalcin (ipekyalcin@itu.edu.tr), 2018, National Institute of Science Communication and Information Resources (NISCAIR), Dr. K. S. Krishnan Marg (Near Pusa Gate), New Delhi, 110-012, India (43):
  • [2] Mechanical behavior of isothalic polyester-based untreated woven jute and glass fabric hybrid composites
    Ahmed, K. Sabeel
    Vijayarangan, S.
    Rajput, Chhaya
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2006, 25 (15) : 1549 - 1569
  • [3] Mechanical Behavior of Polyester-Based Woven Jute/Glass Hybrid Composites
    Ahsan, Q.
    Tanju, S.
    2ND ASEAN - APCTP WORKSHOP ON ADVANCED MATERIALS SCIENCE AND NANOTECHNOLOGY (AMSN 2010), 2012, 1455 : 145 - 154
  • [4] Mechanical performance of hybrid woven jute-roselle-reinforced polyester composites
    Hamdan, Mohammad Hazim Mohamad
    Siregar, Januar Parlaungan
    Thomas, Sabu
    Jacob, Maya John
    Jaafar, Jamiluddin
    Tezara, Cionita
    POLYMERS & POLYMER COMPOSITES, 2019, 27 (07): : 407 - 418
  • [5] Experimental characterization of woven jute-fabric-reinforced isothalic polyester composites
    Ahmed, K. Sabeel
    Vijayarangan, S.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2007, 104 (04) : 2650 - 2662
  • [6] Experimental characterization of woven jute-fabric-reinforced isothalic polyester composites
    Ahmed, K. Sabeel
    Vijayarangan, S.
    Journal of Applied Polymer Science, 2007, 104 (04): : 2650 - 2662
  • [7] Flexural Mechanical Characterization of Polyester Composites Reinforced with Jute Fabric
    de Assis, Foluke S.
    Pereira, Artur C.
    Monteiro, Sergio N.
    CHARACTERIZATION OF MINERALS, METALS, AND MATERIALS 2018, 2018, : 529 - 534
  • [8] Tensile, flexural and interlaminar shear properties of woven jute and jute-glass fabric reinforced polyester composites
    Ahmed, K. Sabeel
    Vijayarangan, S.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 207 (1-3) : 330 - 335
  • [9] Effect of the Atmospheric Plasma Treatment Parameters on Jute Fabric: The Effect on Mechanical Properties of Jute Fabric/Polyester Composites
    Demir, Asli
    Seki, Yoldas
    Bozaci, Ebru
    Sarikanat, Mehmet
    Erden, Seckin
    Sever, Kutlay
    Ozdogan, Esen
    JOURNAL OF APPLIED POLYMER SCIENCE, 2011, 121 (02) : 634 - 638
  • [10] Effect of fabric biaxial prestress on the fatigue of woven E-glass/polyester composites
    Mostafa, Nawras H.
    Ismarrubie, Z. N.
    Sapuan, S. M.
    Sultan, M. T. H.
    MATERIALS & DESIGN, 2016, 92 : 579 - 589
12345