The effect of Ca and Mn addition on ignition temperature, castability, and electrochemical properties of Mg-alloy by casting

被引：2
|
作者：
Kim, Hye-Sung [1 ]
Kim, Tae-Gyu [1 ]
机构：
[1] Pusan Natl Univ, Coll Nanosci & Nanotechnol, Dept Nanomat Engn, 50 Cheonghak Ri, Miryang 629706, Kyungnam, South Korea
来源：
HEAT TREATMENT OF MATERIALS | 2006年 / 118卷 / 485-490期
关键词：
ignition temperature; fluidity test; microstructure of Mg-Ca-Mn alloy; open circuit; potential of Mg-Ca-Mn alloy; electrochemical properties of Mg-Ca-Mn alloy;
D O I：
10.4028/www.scientific.net/SSP.118.485
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of Ca and Mn additions on cast ability, ignition temperature, and electrochemical properties has been investigated in the as-cast magnesium alloys. Not only the remarkable improvement of electrochemical properties but also the ignition prevention of magnesium alloys during melting and casting is achieved by small addition of Ca and Mn into Mg. Flow length of the specimens decrease with an increase of Ca content. Serious decrease of flow ability in Mg melt is observed in Mg-1.31wt%Ca alloy. However, flow length of Mg-Ca alloys is negligibly influenced by small amounts of Mn addition. The improved performance of Mg-Ca alloys is attributed to the homogeneous and refined microstructures with extremely electronegative potential of Ca. It is considered from that serious reduction in flow length of Mg-1.31wt%Ca alloy is due to cast from large solidification interval.
引用
收藏
页码：485 / +
页数：2
相关论文
共 50 条
  • [1] Microstructure and Mechanical Properties of Extruded Mg-Alloy Mg-Al-Ca-Mn-Zn
    Liu Y.
    Kang R.
    Feng X.
    Luo T.
    Li Y.
    Feng J.
    Cao T.
    Huang Q.
    Yang Y.
    Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2022, 36 (01): : 13 - 20
  • [2] Effect of Mn addition on microstructure, texture and mechanical properties of Mg-Zn-Ca alloy
    Tong, L. B.
    Zheng, M. Y.
    Xu, S. W.
    Kamado, S.
    Du, Y. Z.
    Hu, X. S.
    Wu, K.
    Gan, W. M.
    Brokmeier, H. G.
    Wang, G. J.
    Lv, X. Y.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (10-11): : 3741 - 3747
  • [3] Effect of Ca and Mn Additions on the Castability and Mechanical Properties of AZ91D Mg Alloy Permanent Mold Castings
    Elsayed, A.
    Lee, K.
    Ravindran, C.
    TRANSACTIONS OF THE AMERICAN FOUNDRY SOCIETY, VOL 117, 2009, 117 : 659 - 672
  • [4] The effect of micro-alloying addition of Ca and Mn on castability and performance of Mg-based sacrificial anodes
    Kim, HS
    Kim, TG
    Kwon, SH
    PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 2005, 42 (10): : 499 - 512
  • [5] Effect of Cu addition on the microstructure, mechanical properties and thermal properties of Mg-Al-Ca-Mn alloy
    Xiang, Chongchen
    Huang, Zhuo
    Wang, Zijian
    Ding, Hanlin
    Xu, Shun
    MATERIALS CHARACTERIZATION, 2023, 202
  • [6] CASTABILITY OF DENTAL ALLOYS, REPEATED CASTING, MOLD AND ALLOY TEMPERATURE EFFECT
    HIRANO, S
    TESK, JA
    HINMAN, RW
    JOURNAL OF DENTAL RESEARCH, 1983, 62 : 287 - 287
  • [7] Effect of Ca addition on the corrosion behavior of Mg-Al-Mn alloy
    Yang, Jiang
    Peng, Jian
    Nyberg, Eric A.
    Pan, Fu-sheng
    APPLIED SURFACE SCIENCE, 2016, 369 : 92 - 100
  • [8] Effect of Ce Addition on the Tribological Behavior of ZK60 Mg-Alloy
    Banijamali, S. M.
    Palizdar, Y.
    Najafi, S.
    Sheikhani, A.
    Nezhad, M. Soltan Ali
    Moghaddam, P. Valizadeh
    Torkamani, H.
    METALS AND MATERIALS INTERNATIONAL, 2021, 27 (08) : 2732 - 2742
  • [9] Effect of Cr and Mn addition and heat treatment on AlSi3Mg casting alloy
    Tocci, Marialaura
    Donnini, Riccardo
    Angella, Giuliano
    Pola, Annalisa
    MATERIALS CHARACTERIZATION, 2017, 123 : 75 - 82
  • [10] Effects of Ca addition on microstructure and mechanical properties of Mg-RE-Zn casting alloy
    Jun, JH
    Park, BK
    Kim, JM
    Kim, KT
    Jung, WJ
    MAGNESIUM - SCIENCE, TECHNOLOGY AND APPLICATIONS, 2005, 488-489 : 107 - 110
12345