Effect of Modification of Mono-crystalline Corundum Grinding Wheel on Cutting Forces in Grinding of Aluminum Alloy 7075

被引：0
|
作者：
Habrat, Witold [1 ]
Skora, Wojciech [1 ]
Krolczyk, Jolanta B. [2 ]
Legutko, Stanislaw [3 ]
机构：
[1] Rzeszow Univ Technol, Fac Mech Engn & Aeronaut, Rzeszow, Poland
[2] Opole Univ Technol, Fac Mech Engn, Opole, Poland
[3] Poznan Univ Tech, Fac Mech Engn & Management, Poznan, Poland
来源：
ADVANCES IN MANUFACTURING II, VOL 4 - MECHANICAL ENGINEERING | 2019年
关键词：
Grinding; Grinding force; Surface roughness; RSM; Surface quality; WEAR; VIBRATIONS; ROUGHNESS; PRESSURE;
D O I：
10.1007/978-3-030-16943-5_25
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The paper presents an analysis of the process of grinding of aluminum alloy 7075. A monocrystalline corundum grinding wheel with a modified spatial structure was used for the tests in the direction of even "opening" of the grinding wheel during the grinding process. The components of the grinding force measured using the 3-component Kistler 9121 dynamometer and force models for variable grinding parameters were developed using the RSM methodology. The performed tests show the possibility of elaborating models of the components of the cutting force in surface grinding. The empirical models of the cutting force components for a modified grinding wheel were developed. The test results were compared with a conventional wheel with the same hardness, grain size, and structure.
引用
收藏
页码：276 / 286
页数：11
相关论文
共 50 条
  • [1] Cutting forces in end grinding by a wheel
    Khrokin A.N.
    Svirshchev V.I.
    Russ. Eng. Res., 2008, 6 (617-618): : 617 - 618
  • [2] Mirror grinding process for aluminum alloy using elastic grinding wheel
    Yuan, Wei-Jie
    Deng, Ri-Tao
    Yang, Zhen-Tao
    Yin, Shao-Hui
    Surface Technology, 2018, 47 (07): : 21 - 27
  • [3] INFLUENCE OF THE GRINDING WHEEL CUTTING SURFACE PROFILING ON GRINDING FORCES AND GROUND SURFACE-ROUGHNESS
    CEBALO, R
    STROJARSTVO, 1987, 29 (05): : 237 - 246
  • [4] Grinding performance of a new micro-crystalline corundum wheel when form-grinding automobile gears
    Lijun Yang
    Long Wang
    Qian Liu
    Xinli Tian
    The International Journal of Advanced Manufacturing Technology, 2018, 96 : 857 - 870
  • [5] Grinding performance of a new micro-crystalline corundum wheel when form-grinding automobile gears
    Yang, Lijun
    Wang, Long
    Liu, Qian
    Tian, Xinli
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 96 (1-4): : 857 - 870
  • [6] The effect of sulfurization on the grinding wheel cutting ability in the internal cylindrical grinding of nickel superalloys
    Nadolny, Krzysztof
    Sienicki, Walery
    Wojtewicz, Michal
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2017, 231 (01) : 140 - 154
  • [7] The Influence of Crystal Orientation on Subsurface Damage of Mono-Crystalline Silicon by Bound-Abrasive Grinding
    Yang, Wei
    Li, Yaguo
    MICROMACHINES, 2021, 12 (04)
  • [8] The effect of changes in the shape of the wheel cutting surface in the grinding process
    Inst. Sverkhtverdykh Materialov, NAN Ukrainy, Kiev, Ukraine
    Sverkhtverdye Materialy, 2000, (05): : 45 - 52
  • [9] A new model of grit cutting depth in wafer rotational grinding considering the effect of the grinding wheel, workpiece characteristics, and grinding parameters
    Zhang, Yu
    Kang, Renke
    Gao, Shang
    Huang, Jinxing
    Zhu, Xianglong
    PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2021, 72 : 461 - 468
  • [10] Experimental Study on Forces and Surface Roughness in Peripheral Grinding of an Aluminum Alloy
    Atzeni, Eleonora
    Calignano, Flaviana
    Salmi, Alessandro
    Bassoli, Elena
    SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING, 2019, 12 (03) : 229 - 241
12345