Maneuver control of the multilink flexible manipulators

被引:18
|
作者
Vakil, M. [1 ]
Fotouhi, R. [1 ]
Nikiforuk, P. N. [1 ]
机构
[1] Univ Saskatchewan, Dept Mech Engn, Saskatoon, SK S7N 0W0, Canada
关键词
Multilink flexible manipulator; End-effector control; Singular perturbation approach; Integral manifold concept; TIP-POSITION TRACKING; INTEGRAL MANIFOLDS; LINK MANIPULATOR; SYSTEMS; MODEL;
D O I
10.1016/j.ijnonlinmec.2009.05.008
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
In this paper a new controller for the end-effector trajectory tracking (EETT) of multilink flexible manipulators (MLFM) is introduced. The new controller is derived utilizing the concept of the integral manifold of the singularly perturbed differential equations. Based on the new controller, to reduce the end-effector trajectory tracking error, a corrective term of order epsilon(2) has to be added to the computed torque command (CTC) of the rigid link counterpart of the MUM, where the parameter epsilon = 1/2 pi f and f is the smallest non-zero natural frequency (first natural frequency) of the MUM in the specified range of operation of the manipulator. The implementation of the new controller does not require measurement of the time derivative of the links' lateral deflections, which may be practically impossible. This is achieved since the time derivative of the links' lateral deflections is estimated by using an observer, which is designed based on the gain-scheduling technique. The stability of the proposed controller is proven using the Lyapunov criterion. Simulation results showed the effectiveness of the new controller. One of the main contributions of this work is in the derivation of a new EETT controller for the MUM, based on the integral manifold concept, which: (I) requires the fewest corrective terms in addition to the CTC and (2) its calculation effort is minimized. (C) 2009 Elsevier Ltd. All rights reserved.
引用
收藏
页码:831 / 844
页数:14
相关论文
共 50 条