A novel cryogenic machining concept based on a lubricated liquid carbon dioxide

被引：32
|
作者：
Grguras, Damir [1 ]
Sterle, Luka [1 ]
Krajnik, Peter [2 ]
Pusavec, Franci [1 ]
机构：
[1] Univ Ljubljana, Fac Mech Engn, Ljubljana, Slovenia
[2] Chalmers Univ Technol, Dept Ind & Mat Sci, Gothenburg, Sweden
来源：
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 2019年 / 145卷
关键词：
Cryogenic machining; Carbon dioxide; Single-channel MQL; Solubility; Cooling; Lubrication; MINIMUM QUANTITY LUBRICATION; SOLUBILITY; PERFORMANCE; OIL; DROPLETS; TOOL; CO2;
D O I：
10.1016/j.ijmachtools.2019.103456
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A novel single-channel supply of pre-mixed (a) liquid carbon dioxide (LCO2) and (b) oil - delivered via minimum quantity lubrication (MQL) - represents a significant advancement in cryogenic-machining technology. In this proof-of-concept study, an attempt is made to advance the understanding of the oil solubility in LCO2 and to analyze the oil-droplets and their impact on machining performance. The results indicate that the physical and chemical properties of oil distinctively affect its solubility in LCO2. The achieved solubility further influences the achievable oil-droplet size and distribution and tool life.
引用
收藏
页数：6
相关论文
共 50 条
  • [1] Tribology of solid-lubricated liquid carbon dioxide assisted machining
    Pusavec, Franci
    Sterle, Luka
    Kalin, Mitjan
    Mallipeddi, Dinesh
    Krajnik, Peter
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2020, 69 (01) : 69 - 72
  • [2] Progressive Tool Wear in Cryogenic Machining: The Effect of Liquid Nitrogen and Carbon Dioxide
    Kaynak, Yusuf
    Gharibi, Armin
    JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2018, 2 (02):
  • [3] Tool Wear And Cutting Forces When Machining Inconel 718 Under Cryogenic Conditions: Liquid Nitrogen and Carbon Dioxide
    Chaabani, S.
    Rodriguez, I.
    Cuesta, M.
    Ayed, Y.
    Arrazola, P. J.
    Germain, G.
    PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2019), 2019, 2113
  • [4] Cooling capability of liquid nitrogen and carbon dioxide in cryogenic milling
    Pusavec, Franci
    Grguras, Damir
    Koch, Matthias
    Krajnik, Peter
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2019, 68 (01) : 73 - 76
  • [5] Grinding of Cemented Carbide Using a Vitrified Diamond Pin and Lubricated Liquid Carbon Dioxide
    Santhosh, Deepa Kareepadath
    Pusavec, Franci
    Krajnik, Peter
    STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2023, 69 (11-12): : 435 - 443
  • [6] Performance analysis of a novel energy storage system based on liquid carbon dioxide
    Wang, Mingkun
    Zhao, Pan
    Wu, Yi
    Dai, Yiping
    APPLIED THERMAL ENGINEERING, 2015, 91 : 812 - 823
  • [7] Cryogenic carbon dioxide separation from natural gas: a review based on conventional and novel emerging technologies
    Maqsood, Khuram
    Mullick, Aditi
    Ali, Abulhassan
    Kargupta, Kajari
    Ganguly, Saibal
    REVIEWS IN CHEMICAL ENGINEERING, 2014, 30 (05) : 453 - 477
  • [8] Carbon dioxide separation with novel solvents as liquid membranes
    Kovvali, AS
    Sirkar, KK
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2002, 41 (09) : 2287 - 2295
  • [9] Cryogenic Adsorption of Nitrogen and Carbon Dioxide in Activated Carbon
    Shen, Fuzhi
    Liu, Huiming
    Xu, Dong
    Zhang, Hengcheng
    Lu, Junfeng
    Li, Laifeng
    1ST ASIAN ICMC & CSSJ 50TH ANNIVERSARY CONFERENCE, 2017, 897
  • [10] Carbon dioxide laser machining at APL
    Blum, Norman A.
    Charles, Harry K.Jr
    Johns Hopkins APL Technical Digest (Applied Physics Laboratory), 1988, 9 (04): : 380 - 382
12345