Development of a Low-cost Automatic Vacuum Degassing System for Rapid Tooling

被引：3

作者：

Kuo, Chil-Chyuan ^{[1
]}

Wu, Min-Hsiang ^{[1
]}

Lai, Ming-Yang ^{[1
]}

机构：

[1] Ming Chi Univ Technol, Dept Mech Engn, New Taipei City 24301, Taiwan

来源：

APPLIED MECHANICS AND MECHANICAL ENGINEERING IV | 2014年 / 459卷

关键词：

Degassing; Silicone rubber; Rapid tooling; Vacuum casting;

D O I：

10.4028/www.scientific.net/AMM.459.349

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

Silicone rubber mold is frequently used in the indirect tooling. Automatic vacuum casting system is widely used to degas in the manufacturing of silicone rubber mold, but the cost of hardware is very expensive. A low-cost automatic vacuum degassing system is designed, build and test in this study. Optimized parameters for degassing process are investigated. The saving in the degassing time is about 23.4%. This system offers many advantages such as reducing human error of operator, reducing noise and air pollutions derived from the vacuum pump of the vacuum casting system.

引用

页码：349 / 355

页数：7

共 50 条

[1] Development of an automatic vacuum degassing system and parameters optimization for degassing process
Kuo, Chil-Chyuan
Lai, Ming-Yang
INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2011, 18 (06) : 405 - 410
[2] LOW-COST TOOLING
KEMPSON, K
ENGINEERING, 1992, 232 (10): : 30 - 31
[3] LOW-COST RAPID DELIVERY POINT SYSTEM WITH AUTOMATIC RECORDING
AITCHISO.RA
JOURNAL OF APPLIED BEHAVIOR ANALYSIS, 1972, 5 (04) : 527 - &
[4] State of the Art in Low-cost, Rapid Composite Forming Tooling Technologies
Gibbons, G. J.
Hansel, R. G.
Thacker, G.
Arnett, G.
JOURNAL OF ADVANCED MATERIALS, 2009, 41 (02): : 5 - 19
[5] Low-cost reformable multiuse tooling system for composite applications
Jacobson, T
Crowley, J
Stratton, R
Clements, L
Johnson, J
Dickey, J
ADVANCING AFFORDABLE MATERIALS TECHNOLOGY, 2001, 33 : 1079 - 1083
[6] LOW-COST VACUUM-FORMING SYSTEM
OLEARY, JP
BIANCHI, EA
FOULDS, RA
ORTHOTICS AND PROSTHETICS, 1976, 30 (01): : 23 - 29
[7] A SIMPLE, LOW-COST VACUUM-SYSTEM
BOYLE, FW
STRONG, WR
WIERENGA, PJ
SOIL SCIENCE SOCIETY OF AMERICA JOURNAL, 1989, 53 (01) : 298 - 298
[8] A low-cost automatic acquisition system for photogrammetry
Sebar, Leila Es
Grassini, Sabrina
Parvis, Marco
Lombardo, Luca
2021 IEEE INTERNATIONAL INSTRUMENTATION AND MEASUREMENT TECHNOLOGY CONFERENCE (I2MTC 2021), 2021,
[9] TOOLING - LOW-COST TANGENTIAL DIEHEADS - TANGEL
不详
MACHINE TOOL REVIEW, 1973, 61 (356): : 67 - 67
[10] Additive Manufacturing for Fast, Low-Cost Tooling
LaRussa, Joseph J.
MANUFACTURING ENGINEERING, 2015, 155 (05): : 12 - 12

← 1 2 3 4 5 →