The Indirect Monitoring Method of Oxygen in Heating Furnace Sampling Switch Process

被引：0
|
作者：
Chen, Zaiping [1 ,2 ]
Liu, Feng [1 ,2 ]
Sun, Quansheng [3 ]
机构：
[1] Tianjin Univ Technol, Tianjin Key Lab Control Theory & Applicat Complic, Tianjin 300384, Peoples R China
[2] Tianjin Univ Technol, Sch Elect Engn, Tianjin 300384, Peoples R China
[3] Tianjin Petrochem Corp, Equipment Res Inst, Tianjin 300271, Peoples R China
来源：
MACHINERY ELECTRONICS AND CONTROL ENGINEERING III | 2014年 / 441卷
关键词：
Oxygen Analyzer; Alternating Sampling; Oxygen content; Indirect Monitoring;
D O I：
10.4028/www.scientific.net/AMM.441.368
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
In view of the process of sampling switch judgment problem of alternating sampling two furnaces oxygen content with an oxygen analyzer, this paper provides an indirect method to monitor oxygen content of furnace sampling switch process based on the time and data. The experimental results show that the method can solve the end decision problem in the process of sampling switch very well. At present, the method has been applied to concrete in practical engineering, having a good effect.
引用
收藏
页码：368 / +
页数：2
相关论文
共 50 条
  • [1] Multichannel profile-based monitoring method and its application in the basic oxygen furnace steelmaking process
    Qian, Qingting
    Fang, Xiaolei
    Xu, Jinwu
    Li, Min
    JOURNAL OF MANUFACTURING SYSTEMS, 2021, 61 (61) : 375 - 390
  • [2] Modeling of Metal Cone Heating in Indirect Induction Furnace
    Frizen, Vasiliy
    Shvidkiy, Eugene
    Fatkullin, Salavat
    2016 19TH INTERNATIONAL SYMPOSIUM ON ELECTRICAL APPARATUS AND TECHNOLOGIES (SIELA), 2016,
  • [3] Temperature uniformity improvement in a solar furnace by indirect heating
    Oliveira, F. A. C.
    Fernandes, J. C.
    Rodriguez, J.
    Canadas, I.
    Galindo, J.
    Rosa, L. G.
    SOLAR ENERGY, 2016, 140 : 141 - 150
  • [4] HEATING-UP AND REACTION CHARACTERISTICS OF BURDENS IN OXYGEN BLAST-FURNACE PROCESS
    OHNO, Y
    MATSUURA, M
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1990, 76 (08): : 1262 - 1269
  • [5] TEST OF OXYGEN BLAST FURNACE PROCESS WITH EXPERIMENTAL BLAST FURNACE (DEVELOPMENT OF OXYGEN BLAST FURNACE PROCESS - III).
    Ohno, Yotaro
    Hotta, Hirohisa
    Matsuura, Masahiro
    Ariyama, Tatsuro
    Mitsufuji, Hiroyuki
    Saito, Hiroshi
    Kamoshida, Tomoo
    Saito, Norio
    Ito, Haruo
    Transactions of the Iron and Steel Institute of Japan, 1987, 27 (09)
  • [6] FUNDAMENTAL CONCEPT OF OXYGEN BLAST FURNACE PROCESS (DEVELOPMENT OF OXYGEN BLAST FURNACE PROCESS - I).
    Ohno, Yotaro
    Matsuura, Masahiro
    Saito, Hiroshi
    Transactions of the Iron and Steel Institute of Japan, 1987, 27 (09)
  • [7] Monitoring method of the condition of slag-cleaning furnace in Mitsubishi process
    Kaneda, A
    Hasegawa, N
    EPD CONGRESS 2001, 2001, : 547 - 559
  • [8] Control method of heating furnace temperature
    Gao Yuan
    Li Xiuying
    Han Zhigang
    Proceedings of the 24th Chinese Control Conference, Vols 1 and 2, 2005, : 793 - 796
  • [9] Development and construction of a furnace for biomass with system of direct and indirect air heating
    de Oliveira Melo, Fernanda Augusta
    da Silva, Jadir Nogueira
    Sousa e Silva, Juarez
    Sampaio, Cristiane Pires
    Silva, Denise Freitas
    ACTA SCIENTIARUM-TECHNOLOGY, 2010, 32 (02) : 129 - 136
  • [10] Investigation on Carbon-Deposition Behavior from Heating Cycle Gas in Oxygen Blast Furnace Process
    Liu, Jinzhou
    Wang, Jingsong
    She, Xuefeng
    Zhang, Shiyang
    Xue, Qingguo
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2015, 46 (01): : 93 - 100
12345