Experimental and Numerical Investigations of the Effect of Bolt Position on the Mixed-Mode Fracture Strength of Edge Crack Specimens

被引：0

作者：

Maleki, H. N. ^{[1
]}

Abazadeh, B. ^{[2
]}

Chakherlou, T. N. ^{[1
]}

机构：

[1] Univ Tabriz, Fac Mech Engn, POB 51666-14766, Tabriz, Iran

[2] Univ Bonab, Dept Mech Engn, POB 55517-61167, Bonab, Iran

来源：

JOURNAL OF AEROSPACE ENGINEERING | 2020年 / 33卷 / 06期

关键词：

Fracture mechanics; Mixed mode; Bolt clamping position; Stress intensity factor; STRESS INTENSITY FACTORS; FATIGUE BEHAVIOR; CLAMPING FORCE; INTERLAMINAR FRACTURE; COLD EXPANSION; GROWTH; COMPOSITE; HOLE; REPAIR; PLATE;

D O I：

10.1061/(ASCE)AS.1943-5525.0001192

中图分类号：

V [航空、航天];

学科分类号：

08 ; 0825 ;

摘要：

Experimental and numerical investigations were conducted to evaluate the effect of bolt position along the crack length on the mixed-mode fracture strength and effective stress intensity geometry/loading factor. The experimental tests were carried out on different batches of torque-tightened edge crack specimens, including those with bolts at different distances from the crack tip and simple (without bolt) ones. Finite-element simulations were employed to find the stress intensity geometry factors. The results showed a considerable increase in the fracture strength and a reduction of stress intensity factors in specimens with a bolt positioned closer to the crack tip. (c) 2020 American Society of Civil Engineers.

引用

页数：12

共 50 条

[1] Effect of bolt clamping force on the fracture strength of mixed mode fracture in an edge crack with different sizes: Experimental and numerical investigations
Chakherlou, T. N.
Maleki, H. N.
Aghdam, A. B.
Abazadeh, B.
MATERIALS & DESIGN, 2013, 45 : 430 - 439
[2] Experimental and numerical investigations of crack face adhesive bonding effect on the mixed-mode fracture strength of PMMA
Chakherlou, T. N.
Hakim, S. R.
Mohammadpour, A.
Maleki, H. N.
Aghdam, A. B.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2016, 30 (20) : 2236 - 2256
[3] Investigating bolt clamping force effect on the mixed mode fracture strength and stress intensity factor for an edge crack in PMMA specimens
Chakherlou, T. N.
Maleki, H. N.
Abazadeh, B.
Aghdam, A. B.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 533 : 71 - 81
[4] Experimental and numerical investigations of crack growth under mixed-mode loading
Iric, Sedat
EMERGING MATERIALS RESEARCH, 2020, 9 (04) : 1319 - 1324
[5] NEW SPECIMENS FOR MIXED-MODE FRACTURE INVESTIGATIONS OF GEOMATERIALS
CHONG, KP
KURUPPU, MD
ENGINEERING FRACTURE MECHANICS, 1988, 30 (05) : 701 - &
[6] Mixed-mode fracture of a superelastic NiTi alloy: Experimental and numerical investigations
Katanchi, B.
Choupani, N.
Khalil-Allafi, J.
Tavangar, R.
Baghani, M.
ENGINEERING FRACTURE MECHANICS, 2018, 190 : 273 - 287
[7] Experimental and numerical investigations of mixed-mode ductile fracture in high-density polyethylene
Sahlabadi, Mohammad
Soltani, Naser
ARCHIVE OF APPLIED MECHANICS, 2018, 88 (06) : 933 - 942
[8] Experimental and numerical investigations of mixed-mode ductile fracture in high-density polyethylene
Mohammad Sahlabadi
Naser Soltani
Archive of Applied Mechanics, 2018, 88 : 933 - 942
[9] Experimental and numerical investigation of the mixed-mode delamination in Arcan laminated specimens
Choupani, Naghdali
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 478 (1-2): : 229 - 242
[10] MIXED-MODE STRESS INTENSITY FACTORS FOR THE OBLIQUED EDGE-CRACK IN RECTANGULAR SPECIMENS
FETT, T
INTERNATIONAL JOURNAL OF FRACTURE, 1993, 61 (01) : R3 - R10

← 1 2 3 4 5 →