Superplastic Deformation of Twin Roll Cast AZ31 magnesium alloy

被引:3
|
作者
Ceschini, L. [1 ]
El Mehtedi, M. [2 ]
Morri, A. [1 ]
Sambogna, G. [1 ]
Spigarelli, S. [2 ]
机构
[1] Univ Bologna, SMETEC Dept, V Risorgimento 4, I-40136 Bologna, Italy
[2] Univ Politecn delle Marche, Dept Mech, I-60131 Ancona, Italy
来源
RECENT DEVELOPMENTS IN THE PROCESSING AND APPLICATIONS OF STRUCTURAL METALS AND ALLOYS | 2009年 / 604-605卷
关键词
LOW-TEMPERATURE SUPERPLASTICITY; MECHANICAL-PROPERTIES; GRAIN-SIZE; MG ALLOY; COMPOSITE; EVOLUTION; GROWTH;
D O I
10.4028/www.scientific.net/MSF.604-605.267
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The aim of the present work was to evaluate the potential for superplastic deformation of the AZ31 magnesium alloy produced by Twin Roll Casting (TRC), a continuous casting technology able to convert molten metals directly into a coiled strip. In order to develop a superplastic microstructure, the TRC sheets were heated at 400 degrees C for 2 It, then rolled by multiple passes with re-heating between them, with a total thickness reduction of about 60%. The superplastic behaviour of the alloy was studied by tensile tests, carried out at in the temperature range from 400 degrees C to 500 degrees C and with initial strain rates of 1.10(-3) s(-1) and 5.10(-4) s(-1). The microstructural and fractographic characterization of the alloy was carried out by means of optical (OM) and scanning electron microscopy (SEM). The tensile tests evidenced a superplastic behaviour of the processed AZ31 Mg alloy, with a maximum elongation to failure of about 500% at 460 degrees C, with a strain rate of 5.10(-4) s(-1). The microstructure of the alloy after superplastic deformation showed Fine and equiaxed grains, with a large fraction of high angle boundaries. Analyses of the fracture Surfaces evidenced flow localization around the grains, Suggesting that grain boundary sliding (GBS) was the main deformation mechanism. Failure occurred by cavitation, mainly at the higher testing temperature, due to the prevailing effect of grain growth.
引用
收藏
页码:267 / +
页数:3
相关论文
共 50 条
  • [1] A study of the hot and cold deformation of twin-roll cast magnesium alloy AZ31
    Askari, Hesam
    Young, John
    Field, David
    Kridli, Ghassan
    Li, Dongsheng
    Zbib, Hussein
    PHILOSOPHICAL MAGAZINE, 2014, 94 (04) : 381 - 403
  • [2] Microstructure of asymmetric twin-roll cast AZ31 magnesium alloy
    Zhao Hu
    He Liang-ju
    Li Pei-jie
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2011, 21 (11) : 2372 - 2377
  • [3] Analysis of superplastic deformation of AZ31 magnesium alloy
    Abu-Farha, Fadi K.
    Khraisheh, Marwan K.
    ADVANCED ENGINEERING MATERIALS, 2007, 9 (09) : 777 - 783
  • [4] Inverse and centreline segregation formation in twin roll cast AZ31 magnesium alloy
    Hadadzadeh, A.
    Wells, M. A.
    MATERIALS SCIENCE AND TECHNOLOGY, 2015, 31 (14) : 1715 - 1726
  • [5] Center Line Segregation in Twin-Roll Cast AZ31 Magnesium Alloy
    Zimina, M.
    Slapakova, M.
    Bohlen, J.
    Letzig, D.
    Kurz, G.
    Zaunschirm, S.
    Kastner, J.
    Cieslar, M.
    ACTA PHYSICA POLONICA A, 2018, 134 (03) : 774 - 778
  • [6] Mechanical characteristics of superplastic deformation of AZ31 magnesium alloy
    Abu-Farha, Fadi K.
    Khraisheh, Marwan K.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2007, 16 (02) : 192 - 199
  • [7] Microstructure and Hot Deformation Behaviour of Twin-Roll Cast AZ31 Magnesium Wire
    Arndt, Falko
    Berndorf, Susanne
    Moses, Marie
    Ullmann, Madlen
    Prahl, Ulrich
    CRYSTALS, 2022, 12 (02)
  • [8] INFLUENCE OF THE HEAT TREATMENT ON THE TEXTURE OF TWIN-ROLL CAST AZ31 MAGNESIUM ALLOY
    Zimina, Mariia
    Zimina, Anna
    Pokova, Michaela
    Bohlen, Jan
    Letzig, Dietmar
    Kurz, Gerrit
    Knapek, Michal
    Cieslar, Miroslav
    METAL 2014: 23RD INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2014, : 1051 - 1056
  • [9] Metadynamic recrystallization kinetics of twin roll cast AZ31 alloy during hot deformation
    Ullmann, Madlen
    Graf, Marcel
    Schmidtchen, Matthias
    Kawalla, Rudolf
    11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014, 2014, 81 : 1559 - 1564