Synthesis of Activated Carbon Derived from Garlic Peel and Its Electrochemical Properties

In this paper, hydrochloric acid pretreatment process was used to fabricate the garlic peel-based activated carbon (HGAP) with garlic peel as carbon precursor and KOH as an activator. The single factor experiment method was used to explore the effects of hydrochloric acid concentration, treatment time, water bath temperature, and carbonization temperature on the pore structure of garlic-based activated carbon. Nitrogen adsorption and desorption, XRD, Raman spectroscopy, constant current charge and discharge, cyclic voltammetry and other characterization methods were used to characterize the physical morphology and electrochemical performance of garlic peel-based activated carbon. The results show that the optimal process conditions for preparing the HGAPs are as follows: heating and stirring in a water bath with 1.0 mol/L hydrochloric acid solution at 60 degrees C for 3 h, and the carbonization temperature is 600 degrees C.The specific surface area of HGAP-7 synthesized under the optimal conditions is as high as 3325.2 m g(-1), and the pore volume is 1.881 cm(3) g(-1). Using 6 M KOH as electrolyte, the supercapacitor assembled by HGAP-7 has a specific capacitance of 424.42 F g(-1) at a current density of 1 A g(-1). Compared with non-pretreated garlic peel-based activated carbon, the mesopore contents of HGAPs significantly increase, and the cycle characteristics and rate performance of the supercapacitors are improved.