Microstructural Characterization of Pure Tin Produced by the Drop-on-Demand Technique of Liquid Metal Jetting

被引：12

作者：

Idell, Yaakov ^{[1
]}

Watkins, Nicholas ^{[1
]}

Pascall, Andrew ^{[1
]}

Jeffries, Jason ^{[1
]}

Blobaum, Kerri ^{[1
]}

机构：

[1] Lawrence Livermore Natl Lab, Mat Sci Div, Livermore, CA 94550 USA

来源：

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 2019年 / 50A卷 / 09期

关键词：

Drop-on demand - Low-dislocation density - Micro-structural characterization - Pure tin;

D O I：

10.1007/s11661-019-05357-z

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The microstructure-property relationship of a pure tin part built using the drop-on-demand technique of liquid metal jetting, a cost-effective alternative to selective laser-melting or sintering techniques, was determined. The microstructure of the as-built tin is observed to have minimal stored strain, low dislocation density, few to no voids, and the presence of only the beta-tin phase; concurrently, mechanical properties are shown to be identical to the traditionally manufactured tin.

引用

页码：4000 / 4005

页数：6

共 50 条

[1] Microstructural Characterization of Pure Tin Produced by the Drop-on-Demand Technique of Liquid Metal Jetting
Yaakov Idell
Nicholas Watkins
Andrew Pascall
Jason Jeffries
Kerri Blobaum
Metallurgical and Materials Transactions A, 2019, 50 : 4000 - 4005
[2] Drop-on-demand metal jetting of pure copper: On the interaction of molten metal with ceramic and metallic substrates
Gilani, Negar
Aboulkhair, Nesma T.
Simonelli, Marco
East, Mark
Hague, Richard J. M.
MATERIALS & DESIGN, 2024, 240
[3] Links between fluid rheology and drop-on-demand jetting and printability
Hoath, Stephen
Martin, Graham
Tuladhar, Tri
Mackley, Malcolm
Hutchings, Ian
NIP24/DIGITAL FABRICATION 2008: 24TH INTERNATIONAL CONFERENCE ON DIGITAL PRINTING TECHNOLOGIES, TECHNICAL PROGRAM AND PROCEEDINGS, 2008, : 130 - +
[4] Jetting behavior of polymer solutions in drop-on-demand inkjet printing
Hoath, Stephen D.
Harlen, Oliver G.
Hutchings, Ian M.
JOURNAL OF RHEOLOGY, 2012, 56 (05) : 1109 - 1127
[5] Drop-on-demand solder droplet jetting system for fabricating microstructure
Lee, Taik-Min
Kang, Tae Goo
Yang, Jeong-Soon
Jo, Jeongdai
Kim, Kwang-Young
Choi, Byung-Oh
Kim, Dong-Soo
IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING, 2008, 31 (03): : 202 - 210
[6] Effect of Meniscus Damping Ratio on Drop-on-Demand Electrohydrodynamic Jetting
Kim, Samuel Haedong
Kang, Heuiseok
Kang, Kyungtae
Lee, Sang Ho
Cho, Kwan Hyun
Hwang, Jun Young
APPLIED SCIENCES-BASEL, 2018, 8 (02):
[7] Regimes of Polymer Behaviour in Drop-on-Demand Ink-Jetting
Hoath, Stephen D.
Hutchings, Ian M.
Harlen, Oliver G.
Mcllroy, Claire
Morrison, Neil F.
NIP28: 28TH INTERNATIONAL CONFERENCE ON DIGITAL PRINTING TECHNOLOGIES / DIGITAL FABRICATION 2012, 2012, : 408 - 411
[8] Numerical Simulation on Deposition and Solidification Processes of a Molten Metal Droplet Generated by Drop-on-demand Jetting
Wang, Pengyun
Li, Hejun
Qi, Lehua
Deng, Hailiang
Zuo, Hansong
MATERIALS PROCESSING TECHNOLOGY II, PTS 1-4, 2012, 538-541 : 890 - +
[9] Rheological characterization of liquid electrolytes for drop-on-demand inkjet printing
Ozkan, Merve
Dimic-Misic, Katarina
Karakoc, Alp
Hashmi, Syed Ghufran
Lund, Peter
Maloney, Thad
Paltakari, Jouni
ORGANIC ELECTRONICS, 2016, 38 : 307 - 315
[10] Numerical Simulation of Drop-on-Demand Jetting Process of Metal Droplet Based on Level Set Method
Wang Pengyun
Li Hejun
Qi Lehua
Luo Jun
Li Haipeng
RARE METAL MATERIALS AND ENGINEERING, 2013, 42 : 520 - 524

← 1 2 3 4 5 →